Safe-Home.com

Healthier Living | Child Safety | Eco Friendly Tips

Childproofing A Home Against the Biggest Home Risks to Children

by Barbara 8. July 2012 06:00

Question about the most common dangers to children in and around homes.

Q: "We have a 6 month old baby, our first. Where should we begin to childproof our home? What are the biggest risks to a toddler or younger child? Thanks. Sue."

Answer: According to the USA Today, July 5, 2012 report, the Consumer Protection Product Safety Commission lists drowning, poisoning and tipping furniture as most common dangers. You may recall the baby crib recall. The cribs our parents used for us and we used for our children and grandchildren can no longer be sold. Remember the double release locks you pushed with your foot and the side dropped?  The Commission received reports and does research to determine which products are safe.

Drowning, poisoning and tipping furniture are considered the most common risks to young children. Cordless window blinds are recommended to reduce risks of strangulation.

The COSC recommends that whatever safety devices you buy for do-it-yourself installation or have installed by handymen or professional childproofers meet voluntary industry standards or are recommended by the Juvenile Products Manufacturers Association.

Common sense tells you that poisons, medications, dishwasher detergent, etc. must be stored in secure places whether that place is a cupboard or a closet.

Here are a few suggestions based upon our customers' purchases:

These are childproofing products that are easily installed and may save the life of your child or grandchild or a visiting child.

Thank you for your questions.

Sincerely,

Barbara

 

Safety Tip: Increase Warehouse and Industrial Safety with Edge Pads on Sharp Edges

by Barbara 19. June 2012 04:16

Question about Kids Edge Cushion Pad Large Profile 2 3/8 x 2 3/8 x 36 Inches, Black 100/Case

Q: "Is this the correct product to cover sharp edges of warehouse shelving? Are there other options? Are there corners to match? We need to increase our warehouse safety. Thanks. Sam."

Answer: To choose the correct product or products, first determine the width  or widths you need to cover. Once you have decided that, then choose a color.

For example, the most economical way to purchase the wide edge cushioning is in the 2 3/8 inch x 2 3/8 inch x 36 inch lengths either in boxes of 48 or 100 pieces. That edge padding comes in ivory, gray, taupe , brown and black. Gray and black are currently the more popular colors. If you do not need the width, then the Kids Edge Cushion Padding 1x1 in.YELLOW 100 Ft. with Tape or the Kids Edge Cushion Pad 1 x 1 in. 400 Ft. YELLOW NO TAPE that you attach with adhesive from a caulking gun. Both products come in brown, gray, ivory and black as well.

There are corners to match each width of edge pad. Custom sized corners are available as well.

Another option is more expensive. That is to use the Boing Skin Urethane Corner Cushion Strips which are wider and a little longer. The favorite for warehouses is the Boing Yellow Corner Cushions each of which measures approximately 39.4 inches long by 2.25" x 2.25" x 1/2" thick. Each strip is made from skinned urethane foam which gives it more resilience.

Thank you for your question.

Sincerely,

Barbara

Cardinal Gates Silver Deck Shield Net with 1/2 Inch Mesh Openings for Child Safety

by Barbara 25. April 2012 06:12

Question about the advantages of the Cardinal Gates 50 Ft. Silver Deck Netting over the Cardinal Gates Black Deck Shield Netting

Q: "Why is the silver so much more expensive than the black? Why would installing it be better than the black? Thanks. Tom."

Answer: The silver deck shield netting has a longer life and is less visible on light colored decks or when used to block animals (or children) from pushing between the pickets of fences. Both are easily installed using the wire ties, etc. included with each deck net kit. Both are made from polypropylene plastic and UV protected.

The major differences between the silver and the black deck netting are as follows:

  • Thickness: Silver is substantially sturdier and thicker—more than 7 times thicker than black. Black is approximately 0.26mm thick. Silver is approximately 1.98mm thick.
  • Size of openings: Silver: each "mesh" rectangle measures ½-inch hole size .  Black: each "mesh" rectangle measures about 1.25" x .75". 
  • Visibility: silver is even less visible from a distance.
  • Height: 35 inches for black and 36 inches for the silver
  • Can cut with scissors
  • Ideal for homeowner associations
  • Cable ties (provided) to attach uv mesh netting to deck posts.
  • Eye screws (provided) to attach plastic netting to deck surface.

There are two other lengths available.

Thank you for your question.

Sincerely,

Barbara

ToppleStop Furniture Safety Straps Secure TVs and Furniture For Kid Safety

by Barbara 10. February 2012 08:50

Question about keeping TV sets from injuring or killing children using furniture securing devices.

Q:"In the USA Today on February 9, 2012, a news article talked about 4 children killed or critically injured in the Chicago area when TV's fell on them. How can I make sure my children are safe? We have one old style television and a big screen that sits on a table. Thanks. Sara.

Answer: TV's can injure or kill children. Even small sets when knocked off a tall dresser are dangerous. In 2010 or 2011 Consumer Reports recommended ToppleStop furniture and TV straps for securing furniture. Each set of Topple Stops has two straps, one secures to a wall stud on one to the TV set or the stand. One accident was when a TV set sat on a flimsy aquarium stand. TV sets must be on a heavy piece of furniture with slip resistant feet and a low center of gravity. Children also like to pull out dresser drawers and try to clim to the top: a disaster waiting to happen.

So Topple Stops are furniture straps that you attach to the back of solidly set furniture and secure to wall studs behind the furniture. Topple Stops let you anchor appliances and furniture that weighs up to 400 lbs. For items that weigh up to 200 lbs. install a minimum of 1 kit with two point attaching. You need two kits or four point attachment for objects that weigh 200 to 400 lbs. Remember that nothing substitutes for parental supervision.

For metal units, you attach Topple Stop half with an adhesive pad to a dry surface cleaned with isopropyl alcohol (that gets off any residual grease). Then you attach the other half to a wall stud.

For wooden units, the preferred attachment method is using #8 x 1 inch wood screws to attach the fasteners to the frame or the inside edges top or sides of the furniture.

The wall attachment requires using #10 x 2 inch wood screws to the wall studs behind the furniture. If studs are metal, use t-bar anchors to toggle bolts. You can use wall anchors if each has a minimum holding strength of 100 pounds.

Heavy Duty ToppleStop Furniture Fastening System Kit Contents:

  • Two (2) grey Thumb Lock fasteners, 2" long by one wide with 3/4" lock lever. Use with wood screws or 3M VHB adhesive attachment. (Bonding Times: Wait four hours before adding strap. Adhesive fully bonds after 72 hours.)
  • Two (2) 12" long, 3/4" wide grey locking strap with grommet for wood screw attachment.
  • Four (4) #8 x 1" wood screws for furniture attachment    Two (2) #10 x 2" wood screws for wood wall stud attachment.

Thumb lock fastener attaches to locking strap. Fastener can be moved and locked in either direction on the strap. Lift locking lever to "open." Lock fastener on strap by pushing lever down firmly. Note: Thumb Lock adhesive is non-hardening. Fasteners can be removed without damaging surface if slowly and gently pried off with appropriate tool.Suggestion: Install when children are not present, i.e. asleep for the night.

We also recommend Topple Stops for use in day care centers, hotels, motels, etc. to increase safety and reduce liability insurance costs.

Product Performance Warranty: This product does NOT replace child supervision. This product is only intended to help or reduce movement of equipment during jarring movement. It is common understanding that fastened equipment should fare better during jarring movement than equipment that is not fastened, helping to reduce the amount of damage and injury that could result. No warranty can be properly applied to the performance of the products due to the uncertainty of forces generated, and numerous variables involved in a jarring event, or natural disaster. Products that are defective in material and workmanship prior to installation of the product will be replaced. The user or third party installer accepts liability for injury, loss, or damage, direct or consequential, arising from use or misuse or inability to use the product.

Thanks for your question.

Sincerely,

Barbara

Sliding Door Lock and Sliding Window Lock for Security and Child Safety

by Barbara 2. January 2012 10:42

Question about how to install a sliding door lock on my interior closet doors, my exterior slider windows and my patio sliding door.

Q: "I do not want to install window guards on my windows but I do want to get some ventilation during the winter months here in Florida. We are on the Atlantic side and the breezes are great right now (January). I am concerned about security on the patio door. and downstairs windows. For the upstairs windows, I am concerned more about child safety when grandkids visit. What do you suggest? Thanks. Julie."

Answer: The Cardinal Gates Patio Door Lock comes only in white. the Patio Door Guardian allows you to lock the door with a 3" gap for ventilation. Use on right and left handed sliding doors. Recognized as "one of the best new child safety products" by the National Safe Kids Campaign in Washington, D.C., the Patio Door Guardian works double duty as both a security device and as a childproofing lock.  This unit has a 2 position spring loaded lock with a left and right stop. The keeper plates allows for a 3 inch ventilation gap without minimizing security. This fits most sliding doors and most windows that are vinyl, aluminum or wood. The questions and answers below should help you make your decision.

A new option for sliding doors is the Cardinal Gate Lock-N-Block Sliding Door Gate This gate requires some minor assembly.

Assembly Instructions

  • Choose appropriate screw-in clamps for your door. Screw clamps into gate. These clips will fasten to your open sliding glass door.
  • Screw the stabilized pads into the opposite side of gate. These fit into C-channel of the door frame.
  • Attach gate to open door with clamps, fitting gate into door jamb. Close door to lock in gate.
  • Screw door stop to sliding track to secure sliding door.

Gate Operation:

  • Push red safety button and lift handle 90 degrees upward.
  • Pull gate to open.
  • Close gate and lower handle back to original position.
  • Gate will click when locked.

Gate Dimensions :

  • Gate width is 24"
  • Height 30.5"
  • Thickness: 1"
  • Bar Spacing 1 7/8"
  • Fits all standard sliding doors 1" and 1.5" thick

Lock and Block Sliding Glass Door Gate Features :

  • Patent Pending! Only sliding glass door gate available on the market today!
  • Securely clamps onto the functional panel of a sliding panel door.
  • Helps reduce the risk of injury to your infant or pet, as well as damage to your sliding screen door.
  • Safety gate swings open in both directions, allowing easy entering and existing.
  • Use gate and screen door simultaneously
  • Steel construction
  • Gate swings open in both directions
  • 1 year manufacturer against warranty defects.
  • Gives visibility to sliding doors so child does not run into the sliding door.
  • Along with parent supervision, parents can feel comfortable leaving the sliding door open allowing the fresh air to circulate.
  • Can also be used as a pet gate.
  • Color: White gate with gray hardware.


Questions and Answers:

  •  Will the Patio Door Guardian work on all Patio Doors? This lock is designed to work on all inside sliding Patio Doors.
  •  Will the Patio Door Guardian secure my Patio Door from intruders?This lock is designed to keep your patio door closed and though it does have security benefits it does not lock with a key. It will deter intruders as significant force would have to be used to penetrate the door.
  •  When I mount the Patio Door Guardian to my patio door, how do I determine where to put the screws? You must mount the screws away from the edge of the glass on the sliding door, so you do not break the glass. Do not rely only on the location of mounting plate holes provided with your Patio Door Guardian instructions. Hold the lock up to the desired height and mark your mounting holes away from the glass edge of the door.

I would look at other options for sliding closet doors unless your doors are solid and white. One option would be the Window Guardian Window Stoppers, 4/BOX which are removable suction cups that can stop sliding closet doors as well as windows to keep kids out. These would have to placed in at least two places per door to keep the door from sliding.

Thank you for your question.

Sincerely, Barbara

Installing a Kids Edge Hearth Pad with Metal Backing to Protect Toddler Against Injury

by Barbara 20. October 2011 13:41

Question about the Kids Edge Hearth Pad Metal Frame BROWN, to 78 in.

Q: "I have a fireplace hearth that is made of irregular stones. It is straight across the front and has two returns each of which is about 20 inches. So it is a rectangle. The actual length is 90 inches. How does the metal attach to the hearth and what do I need to do to make it fit?  I have a toddler and am worried about her getting hurt.Thanks. Adam."

Answer: This is the correct hearth pad for an irregular stone hearth. First, the hearth must be at least 1.5 inches above the floor. Second, you will need to purchase an Kids Edge Metal Hearth Pad Extension, BROWN, 24 In. to add to the middle of your hearth pad for the proper length.

To install the hearth pad after unpacking:

  1. Remove tape on tightening rod (6). Remove filler pad (2) from inside cardboard insert and set aside for later use.
  2. There are two sections. The left side is completely covered with pad. The right side, partially covered with pad, slides under the left side for adjustment. You would add the extension to this part.
  3. Then extend sections of unit and place on hearth.
  4. Pull section together until snug on hearth.
  5. Without allowing sections to slide, remove unit and turn over to expose tightening rod.
  6. Insert rod hook into nearest hole and pull sections apart so there is enough tension to keep the hook in hole.
  7. Reposition unit on hearth. Insert Phillips screwdriver into hole at right corner
  8. Turn tightening bolt clockwise until tension is felt.
  9. Make sure the unit is in place by pushing down and back at corners.
  10. Tighten bolt further until unit is secure on hearth.
  11. NOTE: if unit is not secure and tightening bolt will not turn further, then loosen bolt, remove unit and move adjustment hook to next hole. Now reinstall unit.
  12. CAUTION: IT IS POSSIBLE TO TIGHTEN BOLT TOO MUCH CAUSING ENDS TO FLARE OUT CAUSING LOSS OF GRIP.

CUTTING FILLER PAD

  1. For appearance, this step is IMPORTANT. Measure the gap where frame is exposed. Add 3/8 inch to that measurement and mark the filler pad
  2. Place pad on edge of cardboard box, matching mark on pad with black alignment on box.
  3. Use only a sharp long-blade knife such as a fillet knife. DO NOT use a razor knife, utility knife, or other short-blade knife.
  4. Lubricate entire length of knife blade with liquid soap or soapy water.
  5. With light pressure, move knife back and forth, keeping the blade straight with alignment line.
  6.  After top half of pad is cut, turn pad over and repeat.

IMPORTANT NOTICE: The Cardinal Gates Metal-Backed Hearth Guard is designed to help prevent injuries. However, it is always possible for some injuries to occur even thought a protective device is used. We suggest adult supervision at all times. PAD IS “UL RECOGNIZED.”


INSTALLING FILLER PAD

  1. Peel off adhesive backing that bonds to front of frame only.
  2. Carefully press right end of filler pad against pad on right side of frame.
  3. Allow filler pad to rest on top of frame while pressing front of pad into place.
  4. Once the front of filler pad is bonded to frame, lift top corner of filler pad and peel off remainder of adhesive backing.
  5. Now press down on top of filler pad to bond to frame.
  6. Installation is now complete. To remove unit, simply loosen bolt to release tension.

Thank you for your question. Enjoy your little one: she will grow up way too fast!

Sincerely,

Barbara

 

 

Use Cardinal All Metal Safety Gates for Outdoor Pet and Child Safety

by Barbara 3. September 2011 14:20

Question about metal safety gates for outdoor use.

Q: "Which gates do you sell that can be used outdoors? We are looking for a metal gate to mount on our outdoor deck to keep children and pets from falling down the stairs to the lower level. We have already installed black deck netting to protect the openings between the deck posts. Thanks. Bill."

Answer: Safe Home sells several metal gates that will fulfill your needs. All Cardinal brand gates are JPMA certified & adhere to guidelines as set forth by the JPMA & the Consumer Products Safety Commission.

Cardinal Stairway Special Gates come in brown , black and white gates with stainless steel hardware. The Stairway Special Outdoor Gate (Model SS-30OD) come with stainless steel hardware. Optional stainless steel mounting kits are available for Stairway Special Gates bought without the stainless steel hardware.  These safety gates are powder coated so the finish is long-lasting and easily cleaned. Features include a latch system that baffles toddlers yet allows one hand operation for adults, and an optional stop bracket prevents opening over a stairway for greater safety. The Stairway Special will mount at angles up to 30 degrees allowing location of a stud when mounting on drywall.

Stairway Special Gate Features:

  • Gate width is adjustable 27 inches  to 42. 5 inches
  • Height: 29.5 inches
  • Bar Spacing: 2.5 inches
  • Width extensions: 10.5 inch extension (Model BX1) extends width from 42.25 inches to 53 inches. 21.75 inch extension (Model BX2) increases width from 42.5 to 64 inches.

Cardinal Gates Duragates are available in white and taupe. This steel gate is powdercoated for durability. Model MG-25 has a simple mounting system, easy assembly and can mount at any angle. If you need a taller gate, the Duragates also come with height extensions. There are two models, the taupe gate and the white gate, each with an 8 inch height extension included. A total of two extensions can be added increasing the height a total of 16 inches.Width extensions are also available in in white or in taupe.

  • Width is adjustable from 26 ½" to 41 ½"
  • Height 29 ½"
  • Bar Spacing 2 ½"
  • 12” extension (Model BX12) is available for openings 41 ½" to 54"

Please measure carefully. Gates are returnable only if damaged in transit or in unopened boxes. Hope this helps.

Thanks for your question.

Sincerely, Barbara

Window Wedges Made in USA Add Window Safety to Military and Public Housing

by Barbara 27. May 2011 05:33

Question about the Window Wedge Adjustable Velcro Window Stop,144/CS window stop product for slider windows in military housing.

Q: "Our company supplies military installations around the world with safety products. We've been asked to quote on window stops for slider windows for military housing in Asia. Will the Window Wedge work for slider windows? We don't want to install window guards. Thanks. Valerie."

Answer: The Window Wedge fits on the window frame, not in the tracks. Make certain that the window frames are wide enough as Window Wedge® uses one 8 inch velcro strip to which you velcro the 4 inch wedge portion. This product is made in the USA. We asked you to have your customer measure the windows and they are 3/4 inch wide. We recommend that you have two wedges i.e. one package installed on each window. That is because a child pulling on a slider could possibly pull the unit out of the track.

Each window wedge loop strip is 8 inches long and 3/4 inches wide.The actual wedge section is 3.25 inches long.To open the window greater than four inches for cleaning, remove the wedge from the velcro loop portion of the window stopper.

To Install Window Wedge Window Stoppers On a Slider Window:

    Close window. Clean window frame surface before application of loop strip.
    Peel off backing of 8 inch loop strip and place in center of upper horizontal window frame (not on the glass)
    Attach the Window Wedge® to the loop strip with the
    two tines facing the adjacent window section.
    Slide window open until contact is made with the Window Wedge®
    Attach the second Window Wedge® unit to the bottom part of the
    Adjust the position of the Window Wedge® so that the
    window opening is 4 inches or less.
    Note: For maximum child safety, maximum window opening should not exceed 4 inches.

To Install Window Wedge Window Stoppers On a Double Hung or Single Hung Window:

    Close the window
    Clean the surface of the window trim prior to application. Do not attach to glass itself.
    Peel off the backing from the 8 inch loop strip and place in the center of the upper window frame for a double hung or single hung window.
    Attach the Window Wedge® to the loop strip.
    Attach the second window wedge on the other side at the same height.
    Open the window until it is stopped by the window wedge.
    Note: For maximum child safety, maximum window opening should not exceed 4 inches.

Safe Home does offer bulk pricing on this product. Please contact us directly if you need over 144 packages.

Thanks for your question and your purchase!

Sincerely, Barbara

 

Window Stops Fit Inside Window Frame or On Windows or Sliding Doors to Limit Opening

by Barbara 18. April 2011 10:44

Question about options to window guards.

Q: "We have a cottage. Our windows are single hung and sliders. We want to keep windows open for ventilation without the expense of window guards. What window stops do you suggest that don't require hiring a handyman? Thanks. Bethany."

Answer: Safe Home sells 4 different types of window stops. The Window Guardian Super Stopper, The Window Wedge, The Window Warden and the Window Guardian Lock. The best choices still are window guards. The John Sterling Window Guards can be locked with a removable lock and swing open for cleaning windows. These are not expensive but would require a handy man type person if you cannot do the installation itself. The Guardian Angel window guards are much easier to install. They are not lockable but do remove completely from the window mounts.

Window Guardian Super Stopper The fastest and easiest to install is the Window Guardian or Super Stopper window stop. This home safety device combines a 2.75 inch flexible suction cup with a unique shaped wedge (1.25 inch x 2 inch). Clean the window. Open the window 4 inches or less. Suction cup on the stops on either side of the single hung window lock mechanism or along the sides of the sliders (as high as you can). These are also great to limit sliding door openings if you have children you want to keep inside the house.

Window Wedge: The next easiest to install is the Window Wedge®. The Window Wedge® uses two 8 inch velcro strips that are 3/4 inches wide. The wedge portion is removable so you can open the window opening wider for cleaning. The that fit on the window frame itself. Made in USA.

To Install Window Wedge Window Stoppers On a Double Hung or Single Hung Window:

    Close the window
    Clean the surface of the window trim prior to application. Do not attach to glass itself.
    Peel off the backing from the 8 inch loop strip and place in the center of the upper window frame for a double hung or single hung window.
    Attach the Window Wedge® to the loop strip.
    Attach the second window wedge on the other side at the same height.
    Open the window until it is stopped by the window wedge.
    Note: For maximum child safety, maximum window opening should not exceed 4 inches.

To Install Window Wedge Window Stoppers On a Slider Window:

    Close window. Clean window frame surface before application of loop strip.
    Peel off backing of 8 inch loop strip and place in center of upper horizontal window frame (not on the glass)
    Attach the Window Wedge® to the loop strip with the
    two tines facing the adjacent window section.
    Slide window open until contact is made with the Window Wedge®
    Attach the second Window Wedge® unit to the bottom part of the
    Adjust the position of the Window Wedge® so that the
    window opening is 4 inches or less.
    Note: For maximum child safety, maximum window opening should not exceed 4 inches.

Window Guardian Window Lock. The push-button key lock design is a patented feature. Remove the key to keep the window locked. Easy to use, this security lock provides peace of mind and installs easily in minutes. The Window Guardian has a tamper-resistant cover and fits most windows. Requires a screwdriver for installation. White.

Before installation, remove the pull-key and cover.

1. Push the button while pulling the pull-key until it comes free. To remove cover, push down and slide it along the base towards the pull-key end.

2. Place the base on the spacer and line up the screw holes. Using the three #6 at head wood screws attach the base to the window or sill so that the end of the base is close to the edge of the sill or window.

3. Place the pin body onto the base so that the location tab ts into one of the three position slots. Select the position slot that gives the closest t to the keeper without causing interference.

4. Slide the cover along the base from the pull key end until it snaps into place. If it seems to bind, turn the cover around to position the locking bump at the correct end.

5. Place the pull key into the back of the assembled body and rotate gently until it finds the correct alignment and push the button, locking it in place.

6. Locate the keeper and install with the two #6 pan head screws. Clip the cover over the keeper to hide the screws. (Fig 3) An alternate orientation of keeper for vertical mounting is supplied. Use the second keeper as a holder for the pull-key when not engaged in the lock.

7.For aluminum windows, fit the lock to the aluminum adapter with 3 #6 machine screws. Fit the aluminum adapter to the handle or the flange at the end of the window. Secure the adapter with 2 Allen screws with Allen key provided. Use the appropriate keeper or drill a hole in the sill when required.

How to Use the Window Guardian: To unlock, pull the Pull-key and rotate 90 degrees/ the key button does not have to be pressed. The Pull-key can be left in. To remove the Pull-key, press the Pull-key button and pull until the key pops out. A second keeper is supplied as a location to store the Pull-key when not engaged in the lock. To insert the Pull-key into the key hole, rotate the key gently until it slides into alignment with the key hole. Once aligned, press the key button and push the key further into the key hole until you hear a click. Additional holes or keepers can be used to create locking positions that allow for partially open windows. Made in China.

The Window Warden fits in the window track of a double hung, single hung or slider or sliding door or on the window trim that surrounds the glass. Each Window Warden™ Kit Bulk Pack contains:

 

  • One mounting bracket 2 7/8 inches long with two 1/2 inch key hole openings plus two openings for mounting screws (included)
  • One Window Warden Unit (plastic) 2 inches long, 7/8 inches wide and 5/16 inches thick. This mounts onto the bracket using two plastic tab that fits onto the mount using "keyhole" openings on the bracket 
  • Three screws
  • One round stop button for use if unit is mounted onto the window frame. (not required if mounted within the window sliding track.
  • Installation instructions. To lock the Window Warden, push in the side button lock pin or slide the stop button on the top of the unit. To release, move the mechanism on the top of the unit away from the window glass.
Note: None of these products are substitutes for adult supervision. Never leave a child unattended with an open window. Thanks for your question

 

Sincerely, Barbara

Remove Guardian Angel Window Guards from Mounts to Wash Your Windows

by Barbara 20. March 2011 14:07

Question about how you wash your window glass when you have Guardian Angel Window Guards installed

Q: "I need to install window guards because the single hung windows in my new house are only 18 inches above the floor. The windows vary in size but most are 36 inches wide. I also have sliding windows in several rooms. I like sparkling clean windows. How difficult is it to remove the window guards? Are the Guardian Angel guards easy to install? Thanks. Beth."

Answer: Guardian Angel window guards are easy to install and easy to remove, for an adult or older child that is. These window guards are now standardized in the side mount heights as well. That means if you move and choose to remove the window guards to use in your new home, you can drill out the screws and re-install them. Unlike the John Sterling window guards, the Guardian Angel remove completely from the mounting bars.

For your single hung windows, mount a window guard or two or three for taller windows by mounting the lowest mount bar two inches above the sill. Then stack additional mounting bars as needed by butting the ends of the mounting bars together. Then telescope the window bars to lock into the mounting bars.Some people prefer to mount the window guards to cover the entire window. In this case use the longer, taller bars and mount vertically.

If you mount in sliders, the best way is like prison bars. Once more you decide the width opening you want and mount units side by side to fill that space. Yes, prison bars may not be attractive but they don't give your child a ladder to climb!

Each window guard has four locks, two on each side of two of the window bars. For example, there is  one lock on one side of bar 1 in a 3 bar unit and another lock on the other side. Bar 3 has an additional pair. You push in two locks at one time to release the bar. Push to the other side and release the second side. To reinstall, do the reverse. Make sure the bars lock into the side or top and bottom mounts.

Guardian Angel window guards are strong, powder coated white steel. They come in sizes that expand from 14 to 17 inches to those that expand from 73 to 120 inches. There are 3, 4 and 5 bar units that you can mix or match to meet your window protection needs.

Use a pair of Window Wedge window stops or a pair of Window Guardian Super Window Stops to keep the windows from opening more than 4 inches beyond the bars.

Thank you for your questions. Go to any window guard web page for access to our window guard guide.

Sincerely,

Barbara