Safe-Home.com

Healthier Living | Child Safety | Eco Friendly Tips

Window Stops Fit Inside Window Frame or On Windows or Sliding Doors to Limit Opening

by Barbara 18. April 2011 10:44

Question about options to window guards.

Q: "We have a cottage. Our windows are single hung and sliders. We want to keep windows open for ventilation without the expense of window guards. What window stops do you suggest that don't require hiring a handyman? Thanks. Bethany."

Answer: Safe Home sells 4 different types of window stops. The Window Guardian Super Stopper, The Window Wedge, The Window Warden and the Window Guardian Lock. The best choices still are window guards. The John Sterling Window Guards can be locked with a removable lock and swing open for cleaning windows. These are not expensive but would require a handy man type person if you cannot do the installation itself. The Guardian Angel window guards are much easier to install. They are not lockable but do remove completely from the window mounts.

Window Guardian Super Stopper The fastest and easiest to install is the Window Guardian or Super Stopper window stop. This home safety device combines a 2.75 inch flexible suction cup with a unique shaped wedge (1.25 inch x 2 inch). Clean the window. Open the window 4 inches or less. Suction cup on the stops on either side of the single hung window lock mechanism or along the sides of the sliders (as high as you can). These are also great to limit sliding door openings if you have children you want to keep inside the house.

Window Wedge: The next easiest to install is the Window Wedge®. The Window Wedge® uses two 8 inch velcro strips that are 3/4 inches wide. The wedge portion is removable so you can open the window opening wider for cleaning. The that fit on the window frame itself. Made in USA.

To Install Window Wedge Window Stoppers On a Double Hung or Single Hung Window:

    Close the window
    Clean the surface of the window trim prior to application. Do not attach to glass itself.
    Peel off the backing from the 8 inch loop strip and place in the center of the upper window frame for a double hung or single hung window.
    Attach the Window Wedge® to the loop strip.
    Attach the second window wedge on the other side at the same height.
    Open the window until it is stopped by the window wedge.
    Note: For maximum child safety, maximum window opening should not exceed 4 inches.

To Install Window Wedge Window Stoppers On a Slider Window:

    Close window. Clean window frame surface before application of loop strip.
    Peel off backing of 8 inch loop strip and place in center of upper horizontal window frame (not on the glass)
    Attach the Window Wedge® to the loop strip with the
    two tines facing the adjacent window section.
    Slide window open until contact is made with the Window Wedge®
    Attach the second Window Wedge® unit to the bottom part of the
    Adjust the position of the Window Wedge® so that the
    window opening is 4 inches or less.
    Note: For maximum child safety, maximum window opening should not exceed 4 inches.

Window Guardian Window Lock. The push-button key lock design is a patented feature. Remove the key to keep the window locked. Easy to use, this security lock provides peace of mind and installs easily in minutes. The Window Guardian has a tamper-resistant cover and fits most windows. Requires a screwdriver for installation. White.

Before installation, remove the pull-key and cover.

1. Push the button while pulling the pull-key until it comes free. To remove cover, push down and slide it along the base towards the pull-key end.

2. Place the base on the spacer and line up the screw holes. Using the three #6 at head wood screws attach the base to the window or sill so that the end of the base is close to the edge of the sill or window.

3. Place the pin body onto the base so that the location tab ts into one of the three position slots. Select the position slot that gives the closest t to the keeper without causing interference.

4. Slide the cover along the base from the pull key end until it snaps into place. If it seems to bind, turn the cover around to position the locking bump at the correct end.

5. Place the pull key into the back of the assembled body and rotate gently until it finds the correct alignment and push the button, locking it in place.

6. Locate the keeper and install with the two #6 pan head screws. Clip the cover over the keeper to hide the screws. (Fig 3) An alternate orientation of keeper for vertical mounting is supplied. Use the second keeper as a holder for the pull-key when not engaged in the lock.

7.For aluminum windows, fit the lock to the aluminum adapter with 3 #6 machine screws. Fit the aluminum adapter to the handle or the flange at the end of the window. Secure the adapter with 2 Allen screws with Allen key provided. Use the appropriate keeper or drill a hole in the sill when required.

How to Use the Window Guardian: To unlock, pull the Pull-key and rotate 90 degrees/ the key button does not have to be pressed. The Pull-key can be left in. To remove the Pull-key, press the Pull-key button and pull until the key pops out. A second keeper is supplied as a location to store the Pull-key when not engaged in the lock. To insert the Pull-key into the key hole, rotate the key gently until it slides into alignment with the key hole. Once aligned, press the key button and push the key further into the key hole until you hear a click. Additional holes or keepers can be used to create locking positions that allow for partially open windows. Made in China.

The Window Warden fits in the window track of a double hung, single hung or slider or sliding door or on the window trim that surrounds the glass. Each Window Warden™ Kit Bulk Pack contains:

 

  • One mounting bracket 2 7/8 inches long with two 1/2 inch key hole openings plus two openings for mounting screws (included)
  • One Window Warden Unit (plastic) 2 inches long, 7/8 inches wide and 5/16 inches thick. This mounts onto the bracket using two plastic tab that fits onto the mount using "keyhole" openings on the bracket 
  • Three screws
  • One round stop button for use if unit is mounted onto the window frame. (not required if mounted within the window sliding track.
  • Installation instructions. To lock the Window Warden, push in the side button lock pin or slide the stop button on the top of the unit. To release, move the mechanism on the top of the unit away from the window glass.
Note: None of these products are substitutes for adult supervision. Never leave a child unattended with an open window. Thanks for your question

 

Sincerely, Barbara

Remove Guardian Angel Window Guards from Mounts to Wash Your Windows

by Barbara 20. March 2011 14:07

Question about how you wash your window glass when you have Guardian Angel Window Guards installed

Q: "I need to install window guards because the single hung windows in my new house are only 18 inches above the floor. The windows vary in size but most are 36 inches wide. I also have sliding windows in several rooms. I like sparkling clean windows. How difficult is it to remove the window guards? Are the Guardian Angel guards easy to install? Thanks. Beth."

Answer: Guardian Angel window guards are easy to install and easy to remove, for an adult or older child that is. These window guards are now standardized in the side mount heights as well. That means if you move and choose to remove the window guards to use in your new home, you can drill out the screws and re-install them. Unlike the John Sterling window guards, the Guardian Angel remove completely from the mounting bars.

For your single hung windows, mount a window guard or two or three for taller windows by mounting the lowest mount bar two inches above the sill. Then stack additional mounting bars as needed by butting the ends of the mounting bars together. Then telescope the window bars to lock into the mounting bars.Some people prefer to mount the window guards to cover the entire window. In this case use the longer, taller bars and mount vertically.

If you mount in sliders, the best way is like prison bars. Once more you decide the width opening you want and mount units side by side to fill that space. Yes, prison bars may not be attractive but they don't give your child a ladder to climb!

Each window guard has four locks, two on each side of two of the window bars. For example, there is  one lock on one side of bar 1 in a 3 bar unit and another lock on the other side. Bar 3 has an additional pair. You push in two locks at one time to release the bar. Push to the other side and release the second side. To reinstall, do the reverse. Make sure the bars lock into the side or top and bottom mounts.

Guardian Angel window guards are strong, powder coated white steel. They come in sizes that expand from 14 to 17 inches to those that expand from 73 to 120 inches. There are 3, 4 and 5 bar units that you can mix or match to meet your window protection needs.

Use a pair of Window Wedge window stops or a pair of Window Guardian Super Window Stops to keep the windows from opening more than 4 inches beyond the bars.

Thank you for your questions. Go to any window guard web page for access to our window guard guide.

Sincerely,

Barbara

Fridge Lock Helps Protect Against Spoiled Food and Child Suffocation

by Barbara 18. November 2010 07:14

Question about the Fridge Guard Appliance Child Lock, CLEAR, the Fridge Guard Appliance Child Lock, WHITE and the Double Door Fridge Guard, Child Safety Strap, Black

Q: "I have two problems. The first is that my young children have opened my refrigerator door several times in the past few weeks and pulled out food and drink, leaving a real mess on the floor. The second is that I have a freezer in the basement, a chest type, that I am not using. I am afraid the kids may use it for hide and seek. I have stuff piled on top now to discourage them. I don't feel it is safe, Do you have products that will help keep my kids safe? Thanks. Mary."

Answer: We sell three products. The first two are identical except one is clear and the other is white. These are the Fridge Guard appliance locks to keep kids out of refrigerators. The only other option to consider is a chain with combination lock that wraps around the entire unit. For the chest type freezer, I have no suggestions.

Here is the Fridge Guard information. This works on single door units. Parent Units' Fridge Guard Appliance Child Lock is a clear or white plastic refrigerator safety latch closure that uses high-bonding adhesive that will not mar refrigerator surface. This removable refrigerator lock or freezer door lock uses latch and hook to secure doors from young children. This child safety product is made in the USA. This sturdy child safety lock also protects against dumps, spills, or doors left ajar.
 
    * Easily Installed: Apply latch to side or top for double doors and freezers. Remove red liner from hook. Apply to door with hook facing forward. Install latch in desired location. Press firmly for 20 seconds. Allow adhesive to set overnight.
    * Easily Used: To open refrigerator, press inward on door handle and release flexible latch over hook. Latch resets automatically when door closes.
    * Easily Removed: Gently pry off hook and latch. Use olive oil to remove any adhesive residue.
    * Clear or White.
    * Note: Use as freezer door lock or refrigerator lock to keep younger children safter. For unused refrigerators or freezers, install latches to extend one inch beyond the hooks. Insert up to a 1-inch block of foam or plastic for ventilation through door opening. Refrigerators or freezers with ventilation are less likely to have mold or mildew problems.
    * Remember: No protective device takes the place of adult supervision.


Parent Units' Double Door Fridge Guard  is a black buckle style lock for double door refrigerators or on the refrigerator doors of trio style refrigerators. This child safety device is easily installed and easily removed by adults. If you have an unused double door refrigerator or one in the garage or basement where you store alcoholic beverages, use this safety device to make sure children stay out. The durable rubber strip combines with a patented buckle to securely lock fridge doors.  This stops your children safer from dangerous items or from leaving doors open causing food disasters.

Parent Units' Double Door Fridge Guard :

    * Simple to install
    * Easy buckle lock/unlock for adults to use
    * Keeps double door fridges off limits to little ones.
    * For use on standard kitchen and bathroom cabinets.
    * All childproofing works better when children are not present. We advise you install home and child safety devices when children are asleep for the night.
    *Warning: Always rely on supervision as your best defense against accidents and injuries. Prevention is paramount. True this product is a highly reliable backup, but no product can be 100% fail safe. Proper Installation required. Use a licensed contractor for best performance.

Below are the product performancy warranties for both units:
Product Performance Warranty: This product must be used with supervision. Due to uncertainty of forces generated and numerous variables involved in a jarring event, no warranty can be properly applied to the performance of the product. Parent Units' only responsibility shall be to replace any product proven to be defective in material and workmanship prior to installation of the product. Neither seller nor manufacturer shall be liable for any injury, loss or damage, direct or consequential, arising out of the use or misuse, or the inability to use the product installation, whether by the user or third party, constitutes acceptance of these conditions by the user.  

Thank you for your question. I only remember once that one of my sons opened the freezer door and actually turned off the freezer. I did a lot of cooking the next day and threw out a lot of once frozen products.

Sincerely,

Barbara

Door Guardian Door Lock for Child Safe Closets, Basements and Entry Doors

by Barbara 17. November 2010 11:37

Question about the Door Guardian door lock for use on basement doors and pantry doors.

Q: "We live in a house where the basement door is hinged to open into our kitchen. I am concerned about my curious toddler opening the door with the levered door "knob" and falling down the steep stairs and getting injured. Also there are items in our pantry like dog food that I don't want dumped out while my back is turned. Is this the right product for us? We don't want to install deadbolts in the doors because they are hollow core and the next owner may not see that as positive. Thanks. Sara."

Answer: Yes, the Door Guardian is a terrific child safety device to keep inward swinging doors closed to curious children. When my sons were young, we had a similar set-up and had to install a double turn dead bolt lock high on a hollow core door, a rather permanent installation.

Installation sometimes means mortising out the door frame as the unit has to be level when installed. The lock portion should not cause any harm to the door itself. Mount the Door Guardian high on the door frame so that only older children and adults can reach it. Otherwise, you could find yourself locked in the basement! This is a great addition to a pantry door and a lot less expensive that the combination door lock my son and his wife installed to keep the children from midnight raids that left the kitchen a mess.

Mount the Door Guardian unit at least six inches higher than the door knob or the deadbolt. Depending upon the door frame, you may have to mortise out an area so that the stationary part of the unit can be mounted straight, otherwise the lock part may not keep the door closed. Included are two long dry wall screws and three metal self-tapping screws if your door frame is metal.

Slide forward and flip closed to lock. Slide and turn to open the lock. This is installed on the side of the door with the door knob, on the side that swings inward.

Choose from:

Thank you for your question. Let us know if you have other child proofing concerns: we are happy to help you.

Sincerely,

Barbara

Reduce Home Air Leaks, Save Money with Sliding Door Outlet Covers.

by Barbara 1. November 2008 15:39

Question about the electrical outlet covers and sliding door outlet covers such as CoverPlug Duplex Outlet Cover for Electric Outlets, the Plug Guard Energy Saving Safety Outlet Cover, the IVORY STD 3-Prg 1 Screw Outlet Cover,6/PK, the Kiddy Cop Outlet Covers, Leviton 12777, 12/Box, or the Sockit Lockets.

Q: "What kind of energy savings am I likely to have if I replace my standard outlet covers with the ones that slide open and closed? Is it enough to insert those round plugs? Or should I put complete covers such as the CoverPlug onto outlets I am not using? I've noticed cold air coming in through the unused outlets in cold weather."--Jerry

Answer: Reducing air leakage would immediately improve your comfort. To get a dollars and cents number, you'd need to figure in costs of natural or propane gas, oil, etc. Get a professional energy audit: you may need more than outlet covers for significant savings. CareCovers will reduce leakage, though, as I personally learned.

The best and easiest way to childproof and reduce air leaks are to install the sliding door outlet covers, the Plug Guard Energy Saving Safety Outlet Cover, the CareCover probably in warm white or similar sliding door units. The PlugGuard outlet covers fit only standard three prong outlets and come only in white. The CareCover come in cream, brown, white, ivory and sometimes red depending upon if the duplex unit is a Decora or standard outlet. Carecovers also come in non-grounded two prong covers. These units insulate not only the plug holes but the outlet itself as each unit has a foam strip around the exterior to keep air leaks around the exterior of the cover, too.

The CoverPlugs fit over existing unused outlets. They can be painted or wallpapered. When you need the outlet, just pull out the cover as the original outlet is there.

The advantages of the Levitron units is that they are UL listed.  The PlugGuard doors move up and down while the other sliding door covers move from side to side. A less expensive option that is more difficult for kids to remove are the Sockit Lockets. CareCovers were tested using the Minnesota Blower Door Test that showed a 15% decrease in air leakage with Carecovers. Family Handyman magazine in 2008 recommended CoverPlugs.

I quickly installed CareCovers on all my exterior wall outlets several years ago when I felt cold air coming through outlet holes one January day. (My house was built in 1990 with insulation updated in 1994). There was an immediate increase in comfort without raising the thermostat.

All these units will save on energy just by blocking unused outlet holes. If you use the round plug inserts, remember to install foam gaskets behind each outlet cover.

If you have other questions, please contact us.

Sincerely, Barbara

Quantity Purchases of Window Guards for an Apartment Complex

by Barbara 10. April 2008 07:10

Question about Window Guards: "My company needs 200 white window guards. We will be installing these in an apartment complex. I was going to purchase these on-line and wanted to know the best shipping method. These are for windows where the bottom pane moves up and down. I was looking at the John Sterling Window Guards that are 20 inches high and fit a window that is 24 to 42 inches in width." -Erin

Answer: Erin, before we talk about best shipping methods, there are many questions that we need to have answered as Safe Home Products wants to make sure that your company purchases the correct guards and the correct brand of guards for your particular application.

Safe Home Products sells two brands of window guards, Guardian Angel guards are totally removable from the mounting bars and are ASTM approved for New Jersey installations. A different guard is the John Sterling ASTM approved for New Jersey applications. The John Sterling guards come in several types including fixed, swing open, and removable. The John Sterling 1120 series is New York City code approved; the 1130 series is New Jersey approved. Some John Sterling guards have an option for a locking pin or a lock for security purposes. Both brands of window guards can be installed in a wide variety of windows including sliders, horizontally opening windows and casements that wind or push out.

A. Code requirements: Many cities, counties, states have code requirements. Among the codes are these factors:

1. Amount of window opening that must be covered by the guards.

2. Bar spacing requirements: 3.5 inches or 4 inches or 4.5 inches.

3. Open space allowed between the bottom bar and the bottom of the window opening and the top bar and the top of the window opening. Can a permanent window stop be used to keep that top opening at a particular level (say 3.5 to 4 inches)?

4. Fixed (non removeable) Guards versus Removeable Guards: Some codes require that all guards be removable or swing open. Other codes say that fixed must be put in non-sleeping areas, etc.

5. Locking Requirement? Presence or absence of a hole in the window for purposes of using a locking pin or lock device.

6. Requirements for non-opening guards at or above a particular level in a building? (In some cities, the guards installed above the 6th floor must be fixed as fire ladder trucks can rarely reach beyond a 6th floor to rescue people through windows.)

7. Do you want to order bulk packed guards? There is one John Sterling window guard that can be purchased bulk, i.e. you purchase the window guard, the locking channel, the screws, etc. all separately. This guard also comes in white or black.

B. Accurate measurements of the windows: We quote window guards based upon the information provided to us by our customers. Many guards differ in size by only 1 inch. For example, if the window opening is 23 inches wide, the guards we discussed cannot be used. Similarly if the window opening is 42.5 inches, you would need a different sized guard.

D. How will the guards be mounted? Interior or Exterior within a room to be protected? Most guards are mounted inside the interior window frame. There are options for mounting John Sterling window guards side by side to fill larger width or banks of windows. For example when 3 larger double hung windows are in a single window frame, there are supports that can be used for side by side installation. Also some people prefer to mount the guards by securing into the window studs that are around the window.

D. Color: Guardian Angel come only in white. The John Sterling Max Series 1700 come only in white. The John Sterling 1100, 1200 and 1300 series are availabe in off-white or black(special order for larger quantities)

C. Delivery options. Delivery by truck (common carrier) is the most economical for larger orders of guards. The goods would be put on wooden or plastic pallets.

1. Availability of a loading dock? If not, there would be additional shipping charges for a truck with a lift gate.

2. Someone to unload the truck. The freight company's responsibility ends with arrival on site unless special, costly arrangements are made in advance. A fork lift, pallet jack (if a loading dock is available) or manpower would be needed to remove the guards from the truck. Most trucking companies deliver by appointment. So we would need a phone number for the delivery location/person.

3. Is this a commercial address? In general, freight companies will deliver only to commercial business addresses.

4. To get an accurate freight quote, we would need to have a street, city and zip code. With the current fluctuation in fuel prices, this quotation would probably have to be amended prior to shipment of the goods as it would be "good" only for 3 to 4 days.

D. Estimated Time to Deliver On-Site: Orders of 100 or more window guards generally take 14 days to 21 days to manufacture. Occasionally, goods can ship faster than that. Time in transit once shipped averages 4 to 6 days.

Once we get the information above, we can then quote the costs more accurately. For example, if the bar spacing of 4 inches is acceptable, we can quote a comparable guard that is 22 inches high and can be configured both as a fixed and a removable guard. If the 3.5 inch spacing is part of the code, we have only one option to quote and it is a 20 inch high guard.

I hope this information is helpful to you and others who are purchasing window guards to protect children from window falls.

If you have more questions, please do not hesitate to contact me.

Sincerely,
Barbara