Safe-Home.com

Healthier Living | Child Safety | Eco Friendly Tips

Temperature Guard Remote Monitors for Temperature, Humidity & Power Now Need No Land Lines!

by Barbara 5. November 2013 12:25

Q: "I need to know if power fails or the temperature or humidity changes in my home in Connecticut in the winter or in our motor home when we travel in the summer. We winter in Florida and take our animals with us. I live in a safe neighborhood so I am not worried about break-ins. What do you suggest?" Thanks. Calvin

Answer: I suggest you purchase the new CM712 TemperatureGuard Self-Contained Remote Monitor. Microtechnologies introduced the CM712 in late summer 2013. This replaces the VM-500-3 and VM-500-3HT units that required a land line. This is an easily set up unit suitable for computer rooms, homes, motorhomes, boats and more. You may choose to purchase two units, one for your permanent home and one for your on-the-go home. For example, if the 120VAC power in your motor home park fails or your air conditioner stops cooling, you'll know if you are shopping, etc.

The initial cost is about $600. Remember you won't have to pay for a land line. You will need a SIM card, available on a monthly basis from Microtechnologies.com, the manufacturer. Or you can get one from ATT, etc.  Alerts go via the cell network. The three sensors for temperature, power and humidity are built in. If you want you can add a dry contact door sensor. In an RV park, you probably won't need that. The "tweets" are sent right to your cell phone or computer. An internal battery back-up means alerts continue if power fails.

Text Message Alarm Notices Include:

Temperature or humidity goes out of limits

  • A door is opened  (if you have that sensor installed)
  • Water is detected. (if you have that sensor installed)
  • When the alarm condition is corrected.
  • If an alarm condition is not corrected.
  • Power outage
  • Low internal or external battery.

Dual power operation:

120vac with its included wall mount power supply.
12vdc source for use in cars, trucks, campers, boats. Requires 12 Adapter Not Included.

SIM Plan Details:

A SIM card plan is required for the CM712 to connect to the cell network. Two options are: purchase a T-Mobile SIM card through TemperatureGuard.com (Curent cost in 2013 $150 per year or $12.50 per month with an automatic renewal). Or purchase a SIM from AT&T™ or from any GSM cell service provider worldwide. No SIM card is included with the TemperatureGuard unit.

CM712 Features:

  • Quad-band EGSM 850 / 900 / 1800 / 1900 MHz
  • Works on the AT&T™and T-Mobile™ cell networks.
  • Program up to four cell phone numbers to send alarm text messages to.
  • Program an ID text so if you have more than one CM712 you'll know which one is in alarm.
  • Programmable high and low temperature limits for each sensor
  • Programmable alarm time delay for each sensor.
  • Handy reminder feature will send additional text messages if an alarm condition continues.
  • Internal rechargeable battery backup. Approximately 6 hours.
  • Ability to connect external battery for even longer life when power is out
  • Wall mount enclosure.


Specifications:

One internal temperature sensor

Measuring range -4°F to 154°F
Accuracy: +-.4 degrees
Resolution: 1 degree

One internal humidity sensor
Measuring range: 0 to 100% RH
Accuracy: +- 3%
Resolution: 1%

Antenna bulkhead fitting: SMA FemaleCM712

Operating Temperature Range: 32°F to 125°F
Enclosure Dimensions: 5.625" x 3.250" x 1.375"
Plug-in wall transformer included

Facts and Questions:

Q: What is the minimum I need to buy to have a basic monitoring system?
A: One CM712 and a SIM plan.

Q: What type of SIM card does the CM712 use?
A: 1.8V or 3.0V SIM card and complies with the Phase 2 GSM 11.14 standard

Thank you for your question. Please contact us for further information.

Sincerely, Barbara

Reduce Risks for Employees and Customers from Slippery Floors and Keep Insurance Premiums Lower

by Barbara 31. October 2012 08:39

Question about the need to apply an anti-slip formula like Grip On on concrete and tile floors that are slippery when wet.

Q; " Why do I need to apply an anti-slip formula on the ceramic tile in my auto showroom? I have some indoor outdoor rug strips at the door for people to wipe their feet." Thanks. Warren

Answer: First, common sense says that preventing possible accidents is the best way to act when you have a floor that gets slippery either from moisture from beneath or from floor cleaning machines or feet. Having just returned from a trip to China, I will share my experience in a toll road restroom area. Imagine a huge, as in at least 75 feet by 50 feet area that includes a large tiled entrance plus tile in all the Asian and "American" toilets and in front of all of them. Imagine that all this area is wet with a cleaning solution. Shall I add that I walked very carefully because my feet were sliding? And I was concerned I might slide right into the Asian toilet (at least it was a flush one!).  Secondly, Grip On makes concrete, ceramic, marble, granite, terrazzo, quarry tile, slate, and porcelain tile and bathtubs safer by increasing the coefficient of resistance to slipping and sliding. Yet the treatment is invisible.

Third, read what Safety Seal Products, the manufacturer of Grip On writes:

"Slip/fall accidents are a major problem. The statistics are substantial. After auto accidents, SLIP/FALL ACCIDENTS ARE THE LEADING CAUSE OF INSURANCE LIABILITY PAYMENTS. In addition, slip/fall accidents, paid for by workerscompensation claims, have greatly increased over the last 10 years.A

As a general rule of law, if an owner or possessor of a premises is aware of a dangerous condition, which could foresee ably harm an invitee and if he has been put on notice that there is a means to prevent such harm, then it could be inferred that should an accident result in an invitee being harmed, the possessor, owner of the property, would be charged with having the knowledge to correct the defective or accident-causing condition. As a result, the owner may be held to a higher standard of care and his probabilities of being held liable, and for damage against him are likely to be greater.

This partial description of negligence is an excerpt from a letter from our corporate attorneys explaining in simple language, if the owner or processor of a building has a dangerous situation (i.e., a floor that is slippery when wet) and is aware that there is a product available at a reasonable cost that can deter that accident-causing condition and he fails to use it, he has a greater chance of being held liable."

So if you want to keep employees and customers safe and keep your insurance premiums down, we suggest you treat that flooring and any other unsealed concrete flooring in bathrooms, work areas, etc. with Grip On.  Application is fast. You need a clean floor, grease free that is unsealed. You need a mop, a bucket and clean water plus the Grip On. The application lasts for 1 to 3 years or more depending upon the location. Never wax that floor or seal it.

Grip on is inexpensive. Buy in 4 ounce, 16 ounce, gallon, 5 gallon or barrel containers.

Thanks for your question.

Sincerely,

Barbara

Save Money. Prevent Slip & Fall Accidents. Grip On Sale

by Barbara 24. October 2012 05:30

Question about Grip On Gallon Size Anti-Slip Treatment for Tile, Concrete, Marble, etc. Note: due to overstock of the 1 gallon size, price is reduced through December 31, 2013

Q: " How much coverage do you get from a gallon of Grip On? I have an auto dealership with ceramic tiling in the customer waiting room and show room and am concerned about falls in cold weather or rainy weather? How long does this effect last? Thanks. Steve."

Answer:  This one gallon size (128 Oz.) of Grip On treats about 400 square feet. Reduces the potential of personal injuries, lawsuits and litigation, employee days lost and increased insurance costs. The increased coefficient of friction gained when surfaces are treated (not coated) with Grip On® Anti-Slip Solution is a positive proven safety solution for owners of residential and commercial properties and facilities. The invisible "tread" to increases the coefficient of friction by 100% to 500%. Reapply one per year in heavily traffic areas.

Surfaces treated with Grip On® Anti-Slip Solution are automatically skid and slip resistant when wet or moistened. Use Grip On® Anti-Slip Solution on almost all hard surfaces, such as ceramic tile, glazed brick, marble, polished stone, terrazzo, river rock, concrete, and quarry tile.

Grip On®'s Simple Application Instructions:

    Clean and rinse area.
    Pour Grip On™ on surface.
    Mop or sponge area liberally.
    Let stand for 15 to 20 minutes.
    Rinse off with clean water.
    Area is now ready to use.

After treatment, do not wax. Wax fills in the enhanced read created by the Grip On™ treatment. Reapply every 2 years for bath and shower areas. Reapply every year for traffic areas. 

Thanks for your question.

Sincerely,

Barbara

Reasons to Install Sensaphone Remote Monitors Instead of Typical Security Systems

by Barbara 6. January 2012 07:13

Question about advantages of Sensaphone Remote Monitoring Systems over security systems by national or local alarm and security companies.

Q: "We are building a new data center. Our choices are between a national or local alarm and security company with monthly monitoring fees or a Sensaphone system. We want to monitor power, temperature and humidity. We are also concerned about possible water leaks onto the flooring and being able to lower the thermostat in the room if one of the units begins to overheat. Which system do you recommend? Thanks. Bill."

Answer: For a data center, we would recommend the Sensaphone IMS-1000 Internet Remote Monitor, IMS-1002 or Sensaphone IMS-4000 PowerGate2 Outlet Switcher IMS-4302IMS-4000 unit over the Sensaphone Web600 Web-Monitor Alarm, No Land Line Needed. The WEB600 is a great starter solution with accessories like a battery back up, a temperature probe, a zone water detector and a humidity transmitter.  However, when you are talking a larger computer room or data center, you are talking about tens or hundreds of thousands of dollars of equipment that keep your business operational 24/7.

Sensaphone Systems offer these advantages:

  • No Monthly Monitoring Fees: you buy the product and programs it to notify directly any employee or employees you choose without the cost of a central service that runs at least several hundred dollars annually.
  • Real Sensor Values: Universal inputs read actual temperature values and more.
  • Battery Backup: Either included or an inexpensive option.
  • Maximum Flexibility: Notifications using custom voice phone calls, emails, faxes, text messages, SNMP traps, etc. Communication is via land phone lines, cell phones, Ethernet or satellite.
  • Remote Access: You can program remotely whether a phone line product, a web-based products or a satellite product.
  • No Dependencies: stand alone solutions mean you get direct communication without a central service, computer or server in the middle.
  • Field Proven in Sensitive Applications: Proven reliability and validity in emergency response materials, military weapons systems, medicines, Homeland security, etc.
  • Innovation: In-house engineering. Three US patents for unique technologies. Constantly working to make products more powerful and easier to use.
  • Easy to Use: Simple, clear set up and maintenance. You don't have to be an electronics genius! Some products like the IMS series even automatically detect the sensor you've connected and configure it for you. The owners manuals are extensive and clear to follow. Telephone technical support is there, unlimited and toll free.
  • Made in the USA:  Yes! Sensaphone is made in Pennsylvania. All engineering design, manufacturing, servicing, testing and support are here in the USA.

For your data center, Safe Home recommends you choose the IMS-1002 model and then choose from the 9 sensors listed:

If a sensor is disconnected, you will get an alert. Each sensor is continuously monitored by the IMS parent unit. Cat-5 jacks and cables make it easier to connect to remote sensors using existing structured cabling.

The data logging includes a time stamped collection of input values that can be viewed and graphed. Plus you will get a detailed event history of user logins, telephone calles, etc. It is possible to add video integration to have an image sent of the condition that tripped the alarm. This is web-based monitoring with a traditional phone line, too.

You can place the IMS-1000 or IMS-4000 into your server rack. There are no moving parts in the IMS-1000 series units: each is complately standalone with its own internal battery back up.

Please contact us if you have additional questions. Thank you for your questions.

Sincerely, Barbara

IMS-1000 Sensaphone, No Land Line Required, Infrastructure Monitoring System Uses Ethernet Network.

by Barbara 13. November 2011 10:32

Question about the Sensaphone IMS-1000 Remote Monitoring System.

Q: "I have a computer room I need to monitor for humidity, power and temperature. There is no land line in that room. Is the IMS-1000 system the best choice? What sensors will I need to add?  How does this unit mount? I have computer racks in the room. Thanks. Ed."

Answer: Sensaphone designed the IMS or Infrastructure Monitoring System for situations like yours where there is no land line available. It does require an ethernet network. And you can rack mount this monitor into your computer rack. Dimensions (H x W x D): 1.75" x 14" x 7"

The IMS-1000 series of products includes the following key features:

  • Eight sensor inputs to monitor environmental conditions and/or alarm contacts from other computer equipment such as UPS systems.
  • 10/100BASE-T Ethernet port.
  • Internal battery backup for uninterrupted performance.
  • Compact design allows rack-mount, wall-mount, or tabletop installation.
  • Embedded web page to program and manage your IMS-1000 system.

Per Sensaphone's manual for the IMS-1000:

"The system is designed to be a comprehensive method of ensuring 100% up-time of your computer systems. By monitoring all aspects of your computer room, including environmental conditions and network equipment, the system will keep you informed of the status of your infrastructure. Monitored conditions can include temperature levels, humidity levels, line voltage, leak detection, server response, UPS systems, and more. The system allows the computer professional to be notified immediately of any detected problems. Notification can occur via voice telephone call, pager, e-mail, fax or snmp trap. An internal battery backup system insures that the unit will continue to run if main power fails."

Sensaphone does caution: "Caution: The IMS sensors are not TCP/IP devices and therefore should not be connected directly to any wiring infrastructure that is connected to network equipment such as a hub, router, or switch. Sensors use RJ-45 plugs and cables similar to thoseused with Ethernet devices".

Environmental Sensors Needed for Your Computer Room Include:

  • Sensaphone Temperature Sensor 4810 for IMS-1000,4000 The temperature sensor connects to the IMS-1000 via an RJ-45 cable (e.g. CAT5 cable). The connection from the sensor to the IMS-1000 can utilize your existing network wiring infrastructure. For example, the sensor may be installed in another room or another floor. Connect the sensor to your structured wiring network via an RJ-45 jack. At the other end, connect a patch cable from your structured wiring patch panel directly to the IMS-1000 environment input.
  • Sensaphone Humidity Sensor 4820 for IMS-1000,4000 The IMS-4820 Room Humidity Sensor operates between 32° to 122°F (0° to 50°C)and Humidity ranges of 0 to 100% RH. Accuracy is ± 5%. This unit also connects with RJ-45 cable (not included).
  • Sensaphone 4840 External Power Failure Sensor for IMS-1000, 4000 This will handle your worries about power outages. The range is 0 to 250 VAC, 50/60 Hz with an accuracy of ± 2%. The power connection is via a Universal IEC-320 power inlet.

There are several other options as well. These are the:

If you have additional questions, please contact us. Sensaphone does update sensors and remote monitors periodically so product codes and specifications may change.

Thanks for your question.

Sincerely, Barbara