Safe-Home.com

Healthier Living | Child Safety | Eco Friendly Tips

MedReady Automatic Pill Box Dispenser Replacement Battery for Battery Back-UP

by Barbara 18. April 2014 05:51

Question about replacement batteries for MedReady 1600

Q: "I need a new battery for my MedReady 1600 Pill box dispenser. How difficult is it to change it? Is it expensive? Thanks. Sara."

Answer: Medready Replacement Battery is under $15 plus shipping. This battery is easily changed. Open the battery door on the bottom of the unit, remove old battery and insert the new one. This battery fits all Medready 1400, 1500, 1600 and 1700 series. This battery gives up to 72 hours' back-up to a Medready automated pillbox. Great for traveling. Recharge with 12V power socket in your car.

Thanks for your questions.

Sincerely,Barbara

How Many Tubes for the Replacement Blood Pressure Cuff For My Blood Pressure Machine?

by Barbara 5. August 2013 11:01

Question: How do I know which blood pressure cuff to get to match my blood pressure monitor?

Q: "Which cuff do I buy? One tube or two tube? Thanks. Jim."

Answer: This is the chart you need to follow:

  • One tube: for automatic blood pressure monitors
  • Two tubes: for manual inflation blood pressure monitors. You need one tube to connect to the inflation bulb.
  • Three tubes: for manual inflation blood pressure monitors that have an attached stethoscope.

Remember that some blood pressure machines require adapters to handle cuffs larger than or smaller than the one that came with the machine.

Also, you need to choose between D ring cuffs and those that do not have the D-ring tighteners. Measure your arm carefully with a tape measure. Too large of a cuff won't pressurize properly, too small will read incorrectly. Choose between latex and latex-free cuffs. Also remember that cuffs are sometimes sold without the internal bladder.

Thigh cuffs are not made for the majority of automatic machines.

Many cuffs are latex-free.

Replacement blood pressure cuff page on SafeHomeProducts.com gives you a list of many options.

Thanks for your questions.

Sincerely,

Barbara

 

Tags: , , , , , , ,

blood pressure cuff | blood pressure monitor

Chart Showing Safe-T-Alert Replacement 12V Propane Alarms CCI Controls Alarms

by Barbara 26. April 2012 10:35

Question about replacing CCI Controls Propane Gas Alarms and Propane Alarms with Tank Valve Shut-Offs with Comparable Safe-T-Alert models.

Q: "My CCI propane alarm in my RV has failed. What unit is available as a replacement since CCI Controls is not in business?" Thanks. Ed

Answer: Below is a chart. The entire unit must be replaced if your CCI Controls unit has an automatic gas valve shut off. Safe-T-Alert replacements for that unit will not work with the CCI valve. Note: new standards require that propane alarms shut down 5 years after installed to power. Shelf life is 10 years if not used.

Below is our main replacement chart.

CCI # Propane MTI Replacements MTI Replacements
CC-7719.04 70-742-R Kit with Valve Surface Mount
CC-7719.58 70-742-R Kit with Valve Surface Mount
CC-7719.70 70-742-R Kit with Valve Surface Mount
CC-7773-231 30-442-P-BR or 35-742BR Flush Mount
CC-7773.081 30-442-P-BR or 35-742BR Flush Mount
CC-7773.251 30-442-P-WH or 35-742WH Flush Mount
CC-7770.230 30-442-P-WH or 35-742WH Flush Mount
CC-7770.231 30-442-P-WH or 35-742WH Flush Mount
CC-7770.233 30-442-P-WH or 35-742WH Flush Mount
CC-7770.234 30-442-P-WH or 35-742WH Flush Mount
CC-7770.241 30-441-P-BR Surface Mount
CC-7773.151 30-442-P-BR or 35-742BR Flush Mount
CC-7770.244 30-441-P-WH Surface Mount
CC-7770.250 30-442-P-WH or 35-742WH Flush Mount
CC-7770.251 30-442-P-BR or 35-742BR Flush Mount
CC-7770.253 30-442-P-BR or 35-742BR Flush Mount
CC-7770.254 30-442-P-BR or 35-742BR Flush Mount
CC-7770.281 30-442-P-BR or 35-742BR Flush Mount
CC-7770.284 30-442-P-WH or 35-742WH Flush Mount
CC-7771.231 30-442-P-BR or 35-742BR Flush Mount
CC-7773.081 30-442-P-BR or 35-742BR Flush Mount
CC-7773.151 30-442-P-BR or 35-742BR Flush Mount
CC-7773.231 30-442-P-BR or 35-742BR Flush Mount
CC-7773.251 30-442-P-BR or 35-742BR Flush Mount
CC-7773.251 30-442-P-BR or 35-742BR Flush Mount

Note: the 30-442 and 35-442 share the same case size. Both recess into the wall so the unit front is flush with the wall. The 35-742 gives you extra safety as you have a carbon monoxide sensor with alarm in the same unit. Please contact Safe Home at sales@safehomeproducts.com or phone us if you have questions. We also sell Costar 9RV battery powered carbon monoxide alarms and Costar 12RV alarms with 9 volt battery back-up systems. Remember that propane leaks are dangerous and carbon monoxide are as well because they can kill silently.

To find these products on our website, go to www.safehomeproducts.com. Go to the search box. Enter for example Safe-T-Alert of 30-442 in the search and you'll get results fast.

Cut-Out Sizes for Flush Mount Units:

30-442-P-or 35-742:

  • Unit Front Measurements: 6.375"W x 2.875"H x 1"D
  • Unit Back Measurements: 5 3/8" x 1 7/8" (part that recesses into wall.

65-542RV :

  • Unit Front Dimensions: 6.5" x 3.5" x 1 3/8 Deep. Unit back dimensions: 5.5" x 3".
  • Case Dimensions: Cut Out: 5.5" x 3".
  • Select  a  wall  location at  least 4” off the
    floor.  Cut a 5 5/8” (143mm) W x 3 1/8” (79mm) H hole

35-741 Cobination Propane and CO Alarm

  • Front Dimensions: 6.5”W x 2.75”H x 1.5”D
  • Cut Out : 5 3/8" x 1 7/8.

Thank your for your question. Please contact us via sales@safehomeproducts.com if you have more questions.

Sincerely, Barbara

Replace CCI Controls 12V Carbon Monoxide Alarms with Safe-T-Alert

by Barbara 26. April 2012 10:09

Question about replacement of CCI Controls carbon monoxide alarms with Safe-T-Alert Models.

Q: "How do I know which carbon monoxide alarms should replace the discontinued CCI controls models?" Thanks. Jim

Answer: Here is a chart provided by Safe-T-Alert. The Safe-T-Alert 65 Series come in flush mount (the 65-542) and in surface mount (the 65-541). Available colors are brown and white.

 

CCI CO Alarm
Safe-T-Alert Replacement
CC-3400.000 Flush Mount 65-542
CC-3400.001 Flush Mount 65-542-BR
CC-3400.003 Flush Mount 65-542
CC-3400.004 Flush Mount 65-542
CC-3400.050 Flush Mount 65-542
CC-3400.051 Flush Mount 65-542
CC-3400.052 Flush Mount 65-542
CC-3400.053 Flush Mount 65-542
CC-3400.060 Surface Mount 65-541
CC-3400-064 Surface Mount 65-541
CC-3400.062 Surface Mount 65-541
CC-3400.063 Surface Mount 65-541
CC-3400.064 Surface Mount 65-541
CC-3400.090 Surface Mount 65-541
CC-3400.091 Surface Mount 65-541
CC-3400.093 Surface Mount 65-541
CC-3400.094 Surface Mount 65-541

All propane and carbon monoxide alarms should be replaced every 5 years.

65-542 flush mount case dimensions are 6.5” W x 3.5” H x 1 3/8 " deep. A 4 inch wide x 3 inch high cut out is required with a 1 3/8 inch clearance for installation.

Thank you for your question. To find these products on our website, go to www.safehomeproducts.com. Go to the search box. Enter for example Safe-T-Alert of 30-442 in the search and you'll get results fast. Send us email to sales@safehomeproducts.com or phone us if you have more questions.

Sincerely, Barbara

Disposable 4 Inch Furnace Filters MERV 8 with Carbon/Potassium Permanganate to Remove Odors, Dirt and Chemicals

by Barbara 21. January 2012 17:10

Question about the difference between a 4 inch Trion Air Bear Filter Pleated Furnace Filter and the Safe Home Duo Air Purify Furnace Filter 16x25x4 Inch.

Q; "How does the Safe Home Duo4 differ from the pleated 4 inch Trion Air Bear brand filter I currently use in my HVAC system? We are an allergic family but do not want the expensive, high maintenance HVAC systems with HEPA filters or electronic air cleaners. We were looking at the Envirosept Electronic Furnace Panel but those electronic furnace panels come only for one inch furnace slots. Thanks. Tim."

Answer:  Websites that sell the Trion Air Bear Filters note the high efficiency of filtration of the Trion Air Bear whole-house media air cleaners because of synthetic filter media and extended surface pleats that let the air pass straight through the pleats. The consensus is that using highly efficient air filters can increase HVAC equipment life (the motor, etc. remain cleaner) and save money.

Trio Air Bear and Safe Home Duo4 Filter Similarities:

  • Synthetic filter media
  • Extended surface pleats
  • Omni-directional air flow
  • MERV 7 to 8 rating: Note, using a high MERV rated filter on an older furnace with a smaller furnace motor is not advised. 
  • Fit tightly in filter slot: air must go through filter

Trion Air Bear and Safe Home Duo4 Filter Differences:

  • Air Bear has metal wires
  • Safe Home™ Duo4 has Formaldesorb™ impregnated into the media filter so odors, dust, pollen and chemicals are stay in the filter as air flows through it.

So why choose the Safe Home Duo4 Filter over the Trion Air Bear? The major reason is the Formaldesorb™ addition to the media material. Formaldesorb™ combines activated carbon and potassium permanganate. Chemicals like activated carbon and potassium permanganate make the filter media more efficient as they absorb smoke and chemicals as well as neutralize odors. So the air in your home or office is cleaner and smells fresher.  The only other air purifier units that use this combination are the Miracle Air PM-400 Commercial Grade Air Purifier. The MiracleAir HEPA Filtration System is portable and has an activated carbon pre-filter, 82 sq. feet of hospital grade HEPA plus a 15 pound carbon/potassium permanganate filter cartridge that has 12 lbs of activated carbon and 3 pounds of alumina potassium permanganate. So using the Safe Home™ Duo4 gives you a similar combination of carbon and potassium permanganate to reduces odors and volatile organic chemicals in a furnace filter.

Safe Home Duo4 Filter Specifications:

  • Thickness: 4 inches, also fits 5 inch filter slots
  • Captures up to 95% of common household allergens for allergy relief
  • Eliminates odors from pets, paint, cooking, and more
  • Uses high density carbon and advanced compounds plus synthetic filter media
  • Highly effective and affordable: Uses the same materials that protect critical environments in most hospitals
  • MERV 7 polyester white ASHRAE rated allergen filter plus an industrial chemical and odor filter,
  • Replacement intervals: every 3 to 6 months depending upon air quality of building.
  • Fits tightly in slot due to foam around entire outside of filter.
  • 300 grams per square foot of a 50/50 activated carbon and FormaldaSorb™ blend
  • Made in USA
  • Note: This furnace filter is not a control device for radon, carbon monoxide or carbon dioxide.
  • Limited Warranty: Free of manufacturing and material defects . If product is found defective within 30 days of purchase, it will be replaced at no additional charge. 
  • Product is not packaged for sale outside of the United States

Many furnace filters remove dust and dirt, only one aspect of indoor air pollution. Levels of gases from cleaning products, formaldehyde out-gassing from laminated wood, VOC's i.e volatile organic compounds etc. are higher than in the past because of increased sealing and insulation of homes and businesses. For those with allergies and chronic medical problems, indoor air pollution is uncomfortable if not dangerous. The EPA ranks indoor air as often a greater risk than outdoor pollution and water contamination. Allergy and asthma symptoms, as well as long term health problems, are often caused or triggered by these common gases. In many areas, polluted indoor air is a greater health threat than outdoor air or contaminated water.

Thank you for your question. If your allergy symptoms require more, you may want to add a supplemental air purifier system. Consider the Airpura P600-W HEPA,VOC, UV HVAC Whole House Air Purifier which filters air even when the furnace blower is off. This unit pulls air from your return air ducts and passes it through HEPA filtration and a VOC filter while the UV light works to kill bacteria and viruses.

Thanks for your question.

Sincerely, Barbara

 

Safe-T- Alert Replacement RV Carbon Monoxide Alarms for a CCI Controls 3400.0 or 3400.094.

by Barbara 26. December 2011 10:57

Question about which Safe-T-Alert CO alarm replaces the CCI 3400.0

Q: "Hello,I am trying to replace this item for a customer. They currently have a CCI Model No. 3400.0. Which of yours would replace this model?Thanks so much Tammy."

Answer: The replacement units for the CCI Controls 3400.094 carbon monoxide alarms for RV's are the Safe-T-Alert SURFACE MT 12V RV/CO Alarm BROWN, 65-541 or the Safe-T-Alert 65-541 SURFACE MT 12V RV CO Alarm WHITE.

These are both surface mount units.The update to 65 has to do with the 5 year warranty from date of sale. All units should be replace every 5 years.

The good news:  Safe-Alert typically has a summer rebate program ranging from $10 to $20, a true incentive to replace aging units. In 2013 this rebate ends in September.

Safe-T-Alert 12V CO Monitor & Alarm 65-541 RV formerly the 60-541 Features:

  • Fully Operational When CO Alarm is Muted:   Mute does not override detection circuit, giving you full time protection as you ventilate your vehicle.
  • Memory Scan. Retains CO level that activated the alarm . After ventilation, the memory saves the carbon monoxide level.
  • Micro Current Technology. Saves precious battery power.
  • Two Level Carbon Monoxide Alert: Caution Alarm (60 ppm) and Hazard Alarm (at or above 100 ppm).
  • Maintenance free sensor.
  • Loud 85 dB Alarm.
  • Test/Reset Button. Used to temporarily silence alarm during ventilation. Tests all detector functions and activates Memory Scan.
  • Hard Wires to 12 Volt Power
  • UL Listed to UL 2034-2005 for Recreational Vehicles and Unconditioned Areas, including March 8, 2007 revisions. Meets RV standard ANSI A119.2 as required by the RVIA.
  • UL tested for vibration, cooking fumes, shock, humidity, salt water spray, corrosion and temperature extremes.
  • Warranty: Note: The Date Stamped on each Detector is the Date of Manufacture. Each unit has a 10 year shelf life. The Warranty is 1 year and begins from the date of resale. Sensor life is 5 years.  End of Life Date: 5 years from Date of Purchase. The 65- designation is for this newer unit per new regulations. Replace units after 5 years.Contact MTI directly for warranty related questions.
  • Replace if sensor or unit is faulty.
  • Please mark date of installation on unit and replace no more than 5 years from that date. Shelf life: 10 years according to the manufacturer.
  • Made in USA (Illinois)

RV Operating Specifications

  • UL tested for vibration, cooking fumes, shock, humidity, salt water spray, corrosion and temperature extremes.
  • Power 12 VDC, operational range 8-16 volts.
  • 60 milliamp current draw.
  • Operational Temperature Range: -40° F to +150° F (-40° C to +65° C).
  • Case Dimensions: Surface Mount 65-541 5.5"W x 3"H x 1.3"D: Attaches to Wall with Screws.
  • Screw Holes: Centered, approx. 5 1/4" apart.
  • Weight: 65-541 = 0.43 lb. 

Thank you for your question. We appreciate your help in adding this blog.

Sincerely, Barbara

HEPA Filter Cartridge on Amaircare 3000 Portable Air Purifier-How Often to Change the Filter?

by Barbara 12. July 2010 13:48

Question about the Amaircare HEPA Filter Air Purifier Model 3000.

Q: "How often should I change the HEPA filter in my Amaircare 3000 portable air cleaner? I have cats and dogs and use it in my bedroom because my husband is allergic. Thanks." Susan

Answer: Usually the HEPA is changed every 2 to 3 years depending upon where the air purifier is used. What is as important is to wipe off the outside of the metal cabinet regularly and to change the pre-filters and inner filters regularly. Typically the outer filter is changed every 3 to 4 months and the inner filter every 6 months. The outer filter is made from foam and can be washed with detergent and water. The inner filter is made from a pure carbon blanket media that removes VOC's (volatile organic compounds like formaldehyde, paint thinner, etc.) and is not washable.

Americair manufactures its own Amaircare® brand HEPA filters in Canada. Filament is bonded to air filter media for structural support and even pleat spacing. After pleating, filters are enclosed in protective screens and cast in food-grade plastisol at both ends for a 100% air seal. 100 square feet of HEPA filtration material captures the smallest particulates. Each Amaircare HEPA filter is then tested for 99.97% efficiency, with a laser particle counter.

The Amaircare 3000 HEPA filter is a 16 inch cartridge filter that also fits the Amaircare 3050 and and Amaircare 4000. (These units are no longer made.) The same intervals should be followed for the other Amaircare air purifiers which include the Amaircare 2500 and the Roomaid with the VOC canister filter or with the standard HEPA and pre- and post-filters. There are also VOC cartridge filters that can be added to all these air purifiers.

Important: Always replace a HEPA air filter if an air purifier is turned off for more than 3 to 5 days. HEPA is a medium in which bacteria, viruses, etc. can grow if moisture collects in the filter media. Constant air flow keeps the HEPA filter media dry and free of such contaminants. I confess that I take my canister vacuum cleaner into the bedroom, remove the outer filter, lay it on the floor and vacuum it off with the floor tool every few weeks. We have two Boston Terriers  and two cats so the dust raised is incredible. I wipe out the interior with a microfiber cloth.

Thank you for your question.

Sincerely, Barbara