Safe-Home.com

Healthier Living | Child Safety | Eco Friendly Tips

Choosing the Correct John Sterling Window Guard Type to Meet My Needs

by Barbara 13. August 2013 08:05

Question about which John Sterling Window Guards I should purchase.

Q: "I need to protect windows in an apartment complex. I started an order for John Sterling 1125 window guards that did not complete. Please help me.Thanks. Walter"

Answer: There are three types of John Sterling window guards, the 1120 series that meet NYC requirements for non-sleeping rooms, the 1130 series, that come in basic bulk packaging and in units that include mounting bars, escape pins, brackets and screws and the 1170 series, currently only one model that swings open and removes from the mounting posts.

We determined in our phone call that you needed John Sterling 1130 series that open. Below is basic information for anyone who needs to install window guards.

John Sterling Window Guard Types: Fixed or Non-Opening and Swing Open. Check with your local building inspector for the code that applies to your city or state prior to ordering. Measure windows accurately. John Sterling does not recommend mounting these guards vertically.

Non-Opening Window Guards. 1120 Series. 4.5 inch spacing between the bars. These can be ordered in White or Black These are secured with 2.5 inch #10 One Way Screws. To remove the guards, you must break off the screw head and drill out the screw. Add 4 inches to bar height for maximum covered opening. Meet NYC standards for non-sleeping windows.

JS-1123-P   3 Bars 15" H X 23-42"W 
JS-1123-S   3 Bars 15" H X 14-24"W
JS-1123-L   3 Bars 15" H X 42-58"W
JS-1124      4 Bars 20"H X 23-42 "W
JS-1125      5 Bars 25"H X 23-42" W

Non-Opening Window Guards 1130 Series Basic Guards, Bulk Packed. 3.5 inch spacing between the bars. Purchase mounting hardware, locking channel (if desired) etc.  separately. The second number indicates the number of bars. Ex. 1133 has 3 bars and 1139 has 9 bars.  With conversion kits, all can be made swing open type guards. For larger projects, this is the best choice as it is least expensive. White or black.  Add 4 inches for maximum coverage, ex. JS-BK-1133 will protect 11 to 15 inch opening. The last number indicates # of bars. Ex. 1133=3 bars.
         1. JS-BK-1133     11"x 24-42"W
         2. JS-BK-1134-S  14"x 14-24"W
         3. JS-BK-1134     14"x 24-42"W
         4. JS-BK-1134-L  14"x 41-58"W
         5  JS-BK-1135     18"x 24-42"W
         6. JS-BK-1136     22"x 24-42"W
         7  JS-BK-1136-L  22"x 41-58"W
         8. JS-BK-1136-EL 22"x 58-76"W
         9  JS-BK-1138     30"x 24-42"W
         10 JS-BK-1139    33"x 24-42"W

Opening Window Guards 1130 Series. Swing Open. 3.5 inch spacing between the bars. White or Black. Opening protected can be horizontal or vertical. PKG indicates that the screws, locking channel, mounting bracket, lock pin are included.Only white are listed below. The EL and L units are special packages Safe Home had made up since these wider units are not otherwise available except to commercial installers. Add a maximum of 4 inches to the height for maximum window protection.


        1. JS-1133              11"x24-42"W  3Bars Protect opening 11-15 Inches
        2. JS-1134              14"x24-42"W  4Bars Protect opening 14-18 Inches
        3. JS-1135              18"x24-42"W  5Bars Protect opening 18-22 inch
        4. JS-1136              22"x24-42"W  6Bars Protect opening 22-26" Inches
        5. JS-1136-L-PKG     22"x41-58"W  6Bars Protect Opening 22-26" 41-58"Wide
        6. JS-1136-EL-PKG   22"x58-76"W  6Bars Protect Opening:22-26",58-76"wide
        5  JS-1138-PKG       30"x24-42"W  8Bars Protect opening 30-34",24-42"Wide
        6. JS-1139-PKG       33"x24-42"W  9Bars Protect opening 33-37",24-42"wide

Opening Window Guard 1170 Series. Angle Iron. White or Black. Has Locking Channel. Lifts out from mounting brackets. Very difficult to cut with bolt cutters.

JS-1175      21"x24-42 inches.

Please measure your window openings carefully. Remember that window locks are available to limit window openings. These are both keys and un-keyed styles.

Thanks for your question. Go to SafeHomeProducts.com and put the product code of the window guards require into the search bar.

Sincerely,

Barbara

New York City Approved Window Guards for Non-Sleeping Rooms

by Barbara 3. September 2012 05:39

Question about which child safety window guards are approved for use in New York City.

Q: "We are converting a warehouse into apartments. Which window guards are approved for use in New York City? Thanks. Tim."

Answer: The John Sterling 1120 series fixed window guards are New York City Approved window bars for non sleeping areas. Approvals for the JS-1120 series are #HDWG 05-87-86 and HDWG-04-93-09 for use only in double hung style windows.  Never install on a window leading to a fire escape even if this is a non-sleeping room. Check your local borough code for approved window guards for sleeping rooms. Remember that most fire truck ladders can reach only to the 6th story. We recommend that residents in apartment buildings have regularly tested smoke alarms, fire extinguishers, a fire escape plan and smoke hoods.

The JS-1120 series come in a variety of sized. Included are the mounting screws and the window guard unit. These guards offer increased home security and child safety. Just enter the product code/codes of the units you want to see them on our webiste.

The white John Sterling 1120 series come in these sizes.

  • JS-1123-P: 15 inch high bars, expand from 23-42 inches
  • JS-1123-L : 15 inch high bars, expand from 42-58 inches
  • JS-1123-S : 15 inch high bars, expand from 14- 24 inches
  • JS-1124:      20 inch high bars, expand from 23-42 inches
  • JS-1125    : 25 inch high bars, expand from 23-42 inches

The black John Sterling 1120DB series come in these sizes. These unit take 2 to 6 weeks for delivery after they are ordered.

  • JS-1123-PDB : 15 inch high bars, expand from 23-42 inches
  • JS-1123-LDB : 15 inch high bars, expand from 42-58 inches
  • JS-1123-SDB : 15 inch high bars, expand from 14- 24 inches
  • JS-1124-DB   : 20 inch high bars, expand from 23-42 inches
  • JS-1125-DB   : 25 inch high bars, expand from 23-42 inches

John Sterling Fixed Mount Security Window Guard 1120 Series Features:

  • Window Type to Protect: Double Hung
  • Location of Windows: Not in a sleeping Room
  • Spacing between bars: 4.5 inches.
  • Diameter of Bars: 5/16th Inch.
  • Standard Color: Off White. Note: Black option requires 3 to 6 weeks for manufacture.
  • Construction: Steel window guards
  • Strength Test: Tested to withstand 150 lb. force at maximum extended width.
  • Permanently Fixed: Do NOT swing open for easy exit in case of emergency.
  • Made in USA.
  • Manufacturers Limited Warranty: Replacement of any part found defective in material or workmanship. Warranty is limited strictly to replacement of the defective part and does not cover any other expenses which may arise in the use or replacement of such part.
  • Mounting Options: Recessed or Surface Mount. Surface Mount burglar bar installation is easier as screws are easier to drive and less accessible to intruders on the outside.
  • Tamper Resistant: Option to drill out the Phillips cross slots in each screw to make tamper resistant.
  • Installation Options: Double Hung windows only. Mount security bars over both upper and lower window sashes or over lower sash only as desired.
WARNING for Series 1120 Series Sterling Window Guards:
Use of this product on a fire escape window in New York is illegal, could be a serious safety hazard and could result in a fine by the Department of Buildings.  Some communities require a quick means of easy escape from window guards in some applications.  Check your local codes.

John Sterling Window Security Guards when properly installed will tend to discourage illegal intruders.  But no protection is absolute.  With enough time and tools a determined criminal can defeat any barrier.

Installation Requirements:
  • Install only in solid, non-rotting window tracks.  Expand Guard to fit tightly into outside window track.
  • Temporarily support Guard in level position NO MORE THAN 4-1/2 inches from sill to upper half of bottom bar.  Mark location of holes on each side.  Remove Guard and drill 5/32" diameter. pilot holes 1" deep.
  • Re-position Guard and mount with #10 one way screws (included.)
  • Raise the inner window NO MORE THAN 4-1/2" above the lower half of the top bar.  Position "L" shaped stops so as to limit the opening above the Window Guard to a maximum of 4-1/2.

Please contact us for quantity prices. As the quantity increases, our cost decreases and your price decreases, too.

Thanks for your question.

Sincerely,

Barbara

Childproofing A Home Against the Biggest Home Risks to Children

by Barbara 8. July 2012 06:00

Question about the most common dangers to children in and around homes.

Q: "We have a 6 month old baby, our first. Where should we begin to childproof our home? What are the biggest risks to a toddler or younger child? Thanks. Sue."

Answer: According to the USA Today, July 5, 2012 report, the Consumer Protection Product Safety Commission lists drowning, poisoning and tipping furniture as most common dangers. You may recall the baby crib recall. The cribs our parents used for us and we used for our children and grandchildren can no longer be sold. Remember the double release locks you pushed with your foot and the side dropped?  The Commission received reports and does research to determine which products are safe.

Drowning, poisoning and tipping furniture are considered the most common risks to young children. Cordless window blinds are recommended to reduce risks of strangulation.

The COSC recommends that whatever safety devices you buy for do-it-yourself installation or have installed by handymen or professional childproofers meet voluntary industry standards or are recommended by the Juvenile Products Manufacturers Association.

Common sense tells you that poisons, medications, dishwasher detergent, etc. must be stored in secure places whether that place is a cupboard or a closet.

Here are a few suggestions based upon our customers' purchases:

These are childproofing products that are easily installed and may save the life of your child or grandchild or a visiting child.

Thank you for your questions.

Sincerely,

Barbara

 

Boing C Shaped Skin Urethane Foam Edge Cushion Covers 1 Inch Pipe or Pole

by Barbara 16. July 2011 11:34

Question about the Boing Skin Urethane Foam Corner Strip Slim C Yellow 2/BX

Q: "We have exposed 1 inch poles in our warehouse. Lighting in the warehouse is not the best. Can this be used to cover the poles to keep obvious to our employees and keep both them and the poles from damage? How do we install the strips? Thanks. Mark."

Answer: This product was made especially for uses such as you describe. The interior of the pad is curved like a C so it is easily attached to the pole material with GE Silicone I, II or the new II fast set adhesive. You can also use these strips on any one inch diameter parts of your forklift truck.  Each strip is 72 inches long by 1 inch wide and 5/8 inch thick at the thickest point in the middle of the strip. Skin urethane foam has a dense shock absorbing inner layer covered by a tough outer layer. The outer layer is resistant to UV, abrasion, moisture and bacteria. 

We sell the Slim C, the Slim V, Flat Pads, Wall Guard Pads and other Boing products in quantities to meet your need. The minimum purchase quantity varies from product to product. For example, the smallest number of Slim C urethane foam cushioning available is in this quantity of 2. Colors include, ivory, yellow, black and gray.

Thanks you for your question.

Sincerely, Barbara

Remove Guardian Angel Window Guards from Mounts to Wash Your Windows

by Barbara 20. March 2011 14:07

Question about how you wash your window glass when you have Guardian Angel Window Guards installed

Q: "I need to install window guards because the single hung windows in my new house are only 18 inches above the floor. The windows vary in size but most are 36 inches wide. I also have sliding windows in several rooms. I like sparkling clean windows. How difficult is it to remove the window guards? Are the Guardian Angel guards easy to install? Thanks. Beth."

Answer: Guardian Angel window guards are easy to install and easy to remove, for an adult or older child that is. These window guards are now standardized in the side mount heights as well. That means if you move and choose to remove the window guards to use in your new home, you can drill out the screws and re-install them. Unlike the John Sterling window guards, the Guardian Angel remove completely from the mounting bars.

For your single hung windows, mount a window guard or two or three for taller windows by mounting the lowest mount bar two inches above the sill. Then stack additional mounting bars as needed by butting the ends of the mounting bars together. Then telescope the window bars to lock into the mounting bars.Some people prefer to mount the window guards to cover the entire window. In this case use the longer, taller bars and mount vertically.

If you mount in sliders, the best way is like prison bars. Once more you decide the width opening you want and mount units side by side to fill that space. Yes, prison bars may not be attractive but they don't give your child a ladder to climb!

Each window guard has four locks, two on each side of two of the window bars. For example, there is  one lock on one side of bar 1 in a 3 bar unit and another lock on the other side. Bar 3 has an additional pair. You push in two locks at one time to release the bar. Push to the other side and release the second side. To reinstall, do the reverse. Make sure the bars lock into the side or top and bottom mounts.

Guardian Angel window guards are strong, powder coated white steel. They come in sizes that expand from 14 to 17 inches to those that expand from 73 to 120 inches. There are 3, 4 and 5 bar units that you can mix or match to meet your window protection needs.

Use a pair of Window Wedge window stops or a pair of Window Guardian Super Window Stops to keep the windows from opening more than 4 inches beyond the bars.

Thank you for your questions. Go to any window guard web page for access to our window guard guide.

Sincerely,

Barbara

Childproofing Slider Windows

by Barbara 2. May 2003 15:52

Question about window guards for a wide, tall sliding window.

Q: "We have large, sliding windows. One side of each window slides horizontally. The inside measurement (ie, the actual "screen" itself - this measurement does not include any window framing, etc) of the screens are: 61" high, 30" wide. I want to be sure to purchase the correct window guard. Do we have to cover the entire opening of the screen? That seems excessive to me. I was thinking that the guard would need to come up as high as a standard safety gate would - but maybe I am wrong. Please let me know if you have what we need. Sincerely, Kimberly"

Answer:
Dear Kimberly,

To childproof a slider window or a casement (wind out) window, the only safe way is to cover the entire window opening with one or more vertically mounted guards spaced side by side with a 4 inch or less space between them. Yes, this means the guard looks like prison bars. Otherwise a child could use a horizontally installed guard as a ladder and climb over the guard and fall out. In order to slide both sides of your window, you will need to stack guards side by side to cover the entire window. To determine the size that you need, please go to our window guard sizing and selection page.

There was a sad situation in New Jersey a few months back. A child fell OVER a horizontally mounted window guard through the screen. It was a slider window. I was contacted by a man who was going to testify about this tragedy. Horizontal window guards are made for single hung or double hung windows: a window stop can be used to stop that window from opening above the guard so the child cannot climb over. Sometimes, parents will protect the entire window if it is next to a bed or sofa where a child might fall against the window and break the glass.

Since this was originally published in 2003, Safe Home has added a second window guard line, the John Sterling line. These are expanding window guards, not telescoping ones. The window guard sizes range include sizes from an 11 inch window guard that expands to 24-42 inches to a 6 bar guard that expands from 58 inches to 76 inches. Some units are fixed ones that can be modified to swing open egress or escape window guards with accessories such as a locking channel for a six bar basic window and a safety release pin to pull out so the window can swing open.

Feel free to contact us if you have additional questions or want to childproof a number of windows in your home.

Sincerely, Barbara