Safe-Home.com

Healthier Living | Child Safety | Eco Friendly Tips

Toilet Guardian Keeps Toilet Bowl Water From Overflowing Onto Your Floors

by Barbara 6. November 2013 10:44

Question about best way to keep toilets from overflowing.

Q: "I operate a day care center. The older children toilet themselves; the younger ones have supervision. We have problems with children using too much toilet paper. Then the toilet bowls overflow and there is a mess. What device or devices can we install to prevent these bowl overflows? Thanks. Sara

Answer: The Toilet Guardian TB1000B should save your toilets from overflows. Peace of mind at under $100, no plumber required if you are handy. (The plumber's fee is about the same as the unit in most areas.)

The Toilet Guardian includes a bowl sensor and a controller for an internal valve. When the sensor detects an impending toilet overflow, the sensor signals the controller and the internal valve is closed. This is a great addition to public restrooms, day care centers like yours, private homes, etc..

Battery operated (One CR-2477F Coin Battery), this automatic water shut off valve for the toilet water valve installs easily. Just attach to your existing fill valve at the water connection under the tank. When a potential water problem is detected, you hear the alarm and the water is shut off.

This patented design uses superior Texas Instrument MSP430 technology, replaceable battery (five year life), ceramic disk valve and high impact and chemical resistant materials. Each unit undergoes over 15 function, design and manufacturing tests before shipping.

Toilet Guardian Features Include:

  • No plumber required: easily installed.
  • Twin ceramic disk valves
  • TI MSP430 microprocessor
  • Stainless steel solenoid tested to over 500,000 cycles
  • 3V lithium ion battery w/5 yr. life (replaceable), CR2477F battery
  • Small, light weight, highly impact resistant plastic
  • Size: approximately 3 inches tall by 2 inches wide
  • 0 to 125 psi operating pressure
  • LCD icon display identifies the problem
  • Piezo buzzer for audible alert
  • Two Year Manufacturer's Warranty Against Defects

While you are at it, you should consider installing a Floodstop for your hot water heaters or at the very least a Water Screamer water alarm with 130dB alarm. Water heaters often are in isolated areas. No one knows there is a problem until the water leaks cause damage.

Thanks for your question. Please contact us for more information.

Sincerely,

Barbara

Extending Sensor And Valve Shut Off Wires on FloodStop Water Heater Device

by Barbara 27. March 2013 08:33

Question about the Water Heater FloodStop with 3/4" valve FS3/4NPT and extending the length of the sensor and valve shut-off wires.

Q: "I purchased a Water Heater FloodStop with 3/4" valve FS3/4NPT. How far can the controller be located away from the shut off valve? 25 feet? Can I splice the controller to shut off valve wire and add 20 feet? Can I splice the sensor wire and add 30 feet? Thanks for all your help, Jerry"

Answer: Yes, you can extend the length of both wires. The controller can be located at any distance, so 25 feet is no problem. You can do this by splicing in a similar gauge paired wire as you suggested, or you can purchase our Controller to Valve Extension Wire, which is about 8 feet long. If you ordered 4 of them and simply plugged them into each other, you would not have to go buy wire or do any splicing.

You can splice into the sensor wire and extend it by 30 feet no problem. Or you can add Floodstop Individual Water Appliance Additional Water Sensor XS-01 unitsthat each have a 3 foot long wire and interconnect to give you more water sensor coverage. We do not have a controller to sensor extension wire, as the customized length can be so varied that the manufacturer did not create one.

Thank you for your question. Your question was asked of and answered by Mary Joyce and our distributor. I found it and thought it was a great one to share with others. Extending the sensor and valve shut off wires of all the individual FloodStop automatic water sensor and automatic valve shut off devices can be done in a similar fashion.

Sincerely,

Barbara

130 Decibel Free-Standing 9 Volt Battery Water Screamer Alarm for Hard or Soft Surfaces

by Barbara 21. December 2011 09:15

Question about the Gizmode Water Screamer Water Alarm

Question: "I need several very loud water alarms. I live in an older house whose plumbing is being updated slowly. We had a leak under the kitchen sink that was so bad we had to remove the bottom of the cabinet and rebuild it. The flooring warped as well. Is this the right alarm for us? Thanks. Tom."

Answer: Yes, I would choose this alarm if you want a portable extremely loud water alarm. The Water Screamer has a tip resistant commercial grade design and is made from ABS plastic. The 4.5 inch diameter by 2.5 inch tall size means it takes up little room. Just put in on the floor or bottom of a cupboard. There are 4 stainless steel sensor pins that reach into carpeting. The 9 volt battery is not included: the battery can last for years because there is no power drawn from it unless there is a leak. There is a one year warranty on the water alarm itself.

Buy the economy pack if you want to protect 6 different areas. The Water Screamer 9Volt Water Alarm, 130 dB Alarm,6/PK is an economical choice compared to purchasing automatic shut off devices for all the water using appliances in your home.

Thank you for your question. Please contact us if you want information about individual water shut off devices with alarms such as the Flood Stop or a whole house unit such as the Water Cop. We can assist you with finding the best choices for your home.

Sincerely,

Barbara

Attaching Rupture Proof FloodChek Washing Machine Hoses

by Barbara 22. November 2008 06:55

Question about using the FloodChek Washing Machine Hoses and the Product Code: =SM-FC-Gooseneck2. Gooseneck Connectors.

Q: "My washing machine sits fairly close to the wall. I'm concerned that the Floodcheck washing machine hoses are too stiff to install correctly. Can I attach these gooseneck connectors to the back of the machine so that the hoses do not stick straight out, and then attach the hoses to the free end?" Thank you. Howard.

Answer: Yes, the purpose of the goosenecks to provide an angle so the hoses do not stick straight out. We recommend the gooseneck connectors when space is tight for installation. Some customers must install two sets, one on the water supply pipes and one on the washer, to be able to use these rupture proof hoses. Floodchek hoses come in 5 feet and 7 feet lengths, have sturdy brass connectors and are guaranteed for 20 years. If you have a steam dryer, we do sell single hoses as well. Reduce the risks of water damage further by adding a FloodStop Automatic Water Valve and Alarm for Washers, FS3/4H-90 that will turn off water if the machine itself leaks, not an uncommon occurrence.

We also recommend that you add either local water alarms or a unit like the Floodstop washing machine water shut off valve with sensors. The reasons are that sometimes a slow water leak develops under a washing machine that has nothing to do with the hoses themselves. Slow leaks ultimately cause expensive repairs.

Our suggestions for water alarms are:

1. The Flood Detective: The only water alarm that features AC operation with battery back-up. 92 dB alarm. The water sensors detect water at a depth of 1/32", are wafer thin for use under carpets or small spaces and have adhesive strips to keep sensors firmly in place. Flood Detective's fail-safe technology informs you of A/C power loss or low battery levels. 8 foot cord on each sensor. Daisy chain additional water sensors to expand coverage of a single Flood Detective water alarm unit. Multi-sensor Capable: one water alarm can monitor multiple sensors. (Maximum of 5 is recommended for easier location of water leaks.) 7 year warranty.

2.The Gizmode Water Alarm : This is a battery only water alarm with a very loud alarm: Sounds at 110+ db for up to 72 hours. Construction: Sturdy ABS plastic outer shell with 4 stainless steel sensors. Powered by a single 9 volt battery (not included) Low battery warning. Tip resistant. Moisture Sensors: Sensitive to low moisture levels. Standing water not required. Stainless steel sensors: Will not corrode nor stain. Sensor contacts sink deep into carpet, thus detecting the first signs of moisture below the carpet's surface. Size: 3" Diameter x 3" Tall. Takes up minimal space. Optional Sump Pump or Water Overflow Attachment. (Sold Separately). 1 year warranty.

3. The Water Screamer Stand Alone Water Alarm, 130 dB Alarm: This is an extremely loud stand alone water alarm and moisture alarm. Remember that a smoke or carbon monoxide alarm is 85 decibels. Use this in basements, near toilets, under sinks, near water heaters, etc. Powered by a single 9 volt battery, the Water Screamer by Gizmode is 4.5 inches in diameter and 2.5 inches tall. There are four stainless steel probes. Use on carpeting or hard flooring. This is a great unit for crawl spaces, condo complexes, etc. Avoid thousands or hundreds of thousands of dollars of damage plus inconvenience by using a Water Screamer that you can hear through walls!

Thanks for your question.

Sincerely, Barbara

Using Washing Machine FloodStop with Rear Mounted Water Valves

by Barbara 21. May 2008 12:11

Question about the product: Washing Machine FloodStop FS3/4H-90.

Q:"Please tell me how many inches it is from the valve connector to the inside 90 of the device. Please send diagram with measurements if possible. Our valves are located in the back of the box and I have concerns if the valves will protrude past the front cover, plus I want to install water arrestors. Thanks, Jim."

Answer: We checked with the manufacturer's rep as this was beyond our expertise. Bob's response: "I have no diagram available for him, but understand his question.

The distance from the inlet end of the valve where the spinning female threaded collar is to the inside edge of the 90 degree downward outlet end of the valve is 2 9/16 inches (slightly over 2.5 inches). The FloodStop 3/4-H90 was specifically designed for wall box type installations. Numerous wall boxes were evaluated to determine the valve design so it would fit all brands. I cannot remember when someone returned a FloodStop 3/4-H90 because the outlet end of the FS valves did not protrude past the front cover of the wall box. Typically installing water arrestors increases the extension of the FS valves out from the hot and cold water hose-bibs."

FYI: The FloodStop is a dual valved water damage control device that turns off water to a washer machine when the water sensor (placed usually under the machine) senses moisture. The newest model utilizes AC power with a battery backup and has twin ball valves that shut off the water.

Thanks for your question.

Sincerely,
Barbara